The John Deere 2630 is a 2WD utility tractor from the Generation II series. This tractor was manufactured by John Deere in Dubuque, Iowa, USA from 1974 to 1975. The John Deere 2630 is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and three variants of transmission.
The John Deere 2630 utility tractor used the John Deere engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder natural aspirated diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 79.2 PS (58.2 kW; 78.0 HP) at 2,500 rpm of output power.
The JD 2630 is equipped with mechanical steering with power assist, differential hydraulic wet disc brakes, open operator station and 73.8 liters (19.5 US gal.; 16.2 Imp. gal) fuel tank.
John Deere 2630 Specifications
| General Specifications | |
| Model | John Deere 2630 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2,170 mm (85.4 in) |
| Weight | 2,630 kg (5,800 lbs) |
| Fuel tank capacity | 73.8 liters (19.5 US gal.; 16.2 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | John Deere |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Horsepower | 79.2 PS (58.2 kW; 78.0 HP) at 2,500 rpm |
| Starter | Electric |
| Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Mechanical with power assist |
| Brakes | Differential hydraulic wet disc |
| Transmission model | |
| Transmission type | – |
| Gears | 8 forward and 4 reverse |
| Transmission model | |
| Transmission type | Partial power shift with dry disc clutch |
| Gears | 16 forward and 8 reverse |
| Transmission model | Direction Reverser |
| Transmission type | Power shuttle |
| Gears | 8 forward and reverse |
| Tires | |
| Front tires | Ag: 6.00-16 |
| Rear tires | Ag: 16.9-28 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Front PTO type | Optional |
| Front PTO speed | 1,000 rpm |
| Rear PTO type | Independent |
| Rear PTO speed | 540 or 540/1,000 (optional) rpm |
| Hydraulic system | |
| Hydraulic type | Closed center |
| Hydraulic capacity | 38.0 L (40.15 US. qt, 33.44 Imp. qt.) |
| Pressure | 2250 psi (155.1 bar) |
| Valves | 1 |
| Total flow | 14.5 gpm (54.9 lpm) 24.5 gpm (92.7 lpm) |
Be the first to comment