The John Deere 210LE is a 4WD industrial tractor manufactured by John Deere in from 1997 to 2007. The John Deere 210LE is equipped with a 4.5 L (276.0 cu·in) four-cylinder diesel engine and one of two transmissions: a power shuttle transmission with 4 forward and 4 reverse gears or a full power shift transmission with 4 forward and 3 reverse gears.
The John Deere 210LE industrial tractor used the John Deere 4045D engine. It is a 4.5 L, 4,523 cm2, (276.0 cu·in) four-cylinder turbocharged diesel engine with 106.0 mm (4.17 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 79.2 PS (58.2 kW; 78.0 HP) at 2,200 rpm of output power. This tractor could be equipped with the John Deere 4045T engine, with the same displacement and 81.2 PS (59.7 KW; 80.0 HP) at 2,200 of horsepower.
The JD 210LE is equipped with power steering, hydraulic wet disc brakes, two-post ROPS/FOPS or Cab (optional), and 98.4 liters (26 US gal.; 21.6 Imp. gal) fuel tank.
John Deere 210LE Specifications
| General Specifications | |
| Model | John Deere 210LE |
| Length | 5,230 mm (205.9 in) |
| Width | 2,130 mm (83.9 in) |
| Height | 2,470 mm (97.2 in) |
| Wheel base | 2,110 mm (83.1 in) |
| Weight | 4,140 kg (9,127 lbs) |
| Fuel tank capacity | 98.4 liters (26 US gal.; 21.6 Imp. gal) |
| Battery | One or two 12V, CCA: 925A |
| Cabin type | Two-post ROPS/FOPS or Cab (optional) |
| Engine | |
| Engine model | John Deere 4045D |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.5 L, 4,523 cm2, (276.0 cu·in) |
| Bore and stroke | 106.0 mm X 127.0 mm (4.17 in X 5 in) |
| Horsepower | 79.2 PS (58.2 kW; 78 HP) at 2,200 rpm |
| Starter | Electric |
| Oil type | 8.5 |
| Oil capacity: | 16.3 L (17.2 US. qt, 14.3 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Hydraulic wet disc |
| Final drive | Inboard planetary |
| Transmission model | – |
| Transmission type | Power shuttle |
| Gears | 4 forward and 4 reverse |
| Speed | Forward: 33.0 kmh (20.5 mph) Reverse: 33.0 (20.5 mph) |
| Transmission oil capacity | 14.2 L (3.8 US. gal, 3.1 Imp. gal.) |
| Transmission model | – |
| Transmission type | Full power shift |
| Gears | 4 forward and 3 reverse |
| Speed | Forward: 33.0 kmh (20.5 mph) Reverse: 25.9 (16.1 mph) |
| Tires | |
| Front tires | Industrial: 12-16.5 |
| Rear tires | Industrial: 16.9-24 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity (at ends) | 3,115 kg (6,870 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 54.5 L (57.59 US. qt, 47.95 Imp. qt.) |
| Pressure | 2750 psi (189.6 bar) |
| Pump flow | 25.0 gpm (94.6 lpm) |
Be the first to comment