The International Harvester 786 is a 2WD row-crop tractor from the 86 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA and in Geelong, Australia from 1980 to 1981. The International 786 is equipped with a 5.9 L (358.0 cu·in) six-cylinder diesel engine and the Torque Amplifier transmission with 16 forward and 8 reverse gears.
The International 786 row-crop tractor used the International Harvester D358 engine. It is a 5.9 L, 5,867 cm2, (358.0 cu·in) six-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 129.0 mm (5.08 in) of the piston stroke. This engine produced 0 PS ( kW; 0 HP) at rpm of output power.
The IH 786 is equipped with power assist steering, hydraulic disc brakes, open operator station or cab (optional) and 189.3 liters (50 US gal.; 41.6 Imp. gal) fuel tank.
International Harvester 786 Specifications
| General Specifications | |
| Model | International Harvester 786 |
| Length | 4,190 mm (165 in) |
| Width | 2,590 mm (102 in) |
| Height | ROPS: 2,840 mm (111.8 in) |
| Wheel base | 2,560 mm (100.8 in) |
| Ground clearance | 330 mm (13 in) |
| Weight (operating) | 5,260 kg (11,600 lbs) |
| Fuel tank capacity | 189.3 liters (50 US gal.; 41.6 Imp. gal) |
| Battery | Two 12V, CCA 470A |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | International Harvester D358 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 5.9 L, 5,867 cm2, (358.0 cu·in) |
| Bore and stroke | 98.0 mm X 129.0 mm (3.86 in X 5.08 in) |
| Horsepower | – |
| Starter | Electric |
| Oil capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
| Coolant capacity: | 22.7 L (24 US. qt, 20 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Power assist |
| Brakes | Hydraulic disc |
| Transmission model | Torque Amplifier |
| Transmission type | – |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 30.7 kmh (19.1 mph) Reverse: 15.1 (9.4 mph) |
| Transmission oil capacity | 85.2 L (22.5 US. gal, 18.7 Imp. gal.) |
| Tires | |
| Front tires | Ag: 9.5L-15 |
| Rear tires | Ag: 18.4-34 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 85.2 L (22.5 US. gal, 18.7 Imp. gal.) |
Be the first to comment