Ford 2N

Ford 2NThe Ford 2N is a 2WD utility tractor manufactured by Ford in Dearborn, Michigan, USA from 1942 to 1947. The Ford 2N is equipped with a 2.0 L (120.0 cu·in) four-cylinder gasoline engine and a sliding gear transmission with 3 forward and 1 reverse gear.

The Ford 2N utility tractor used the Ford engine. It is a 2.0 L, 1,966 cm2, (120.0 cu·in) four-cylinder natural aspirated gasoline engine with 81.0 mm (3.19 in) of the cylinder bore and 95.0 mm (3.74 in) of the piston stroke. The compression ratio rating is 6.0:1. This engine produced 23.4 PS (17.2 kW; 23.0 HP) at 2,000 rpm of PTO output power.

The Ford 2N is equipped with manual steering, differential mechanical drum brakes, open operator station, and 37.9 liters (10 US gal.; 8.3 Imp. gal) fuel tank.

Ford 2N Specifications

General Specifications
ModelFord 2N
Length2,920 mm (115 in)
Width1,620 mm (63.8 in)
Height1,320 mm (52 in)
Wheel base–
Ground clearance330 mm (13 in)
Weight1,390 kg (3,064 lbs)
Fuel tank capacity37.9 liters (10 US gal.; 8.3 Imp. gal)
Battery6V
Cabin typeOpen operator station
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline
Displacement2.0 L, 1,966 cm2, (120.0 cu·in)
Bore and stroke81.0 mm X 95.0 mm (3.19 in X 3.74 in)
Compression ratio6.0:1
Horsepower23.4 PS (17.2 kW; 23.0 HP) at 2,000 rpm
Torque113.9 N·m (11.6 kg·m, 83.9 ft·lb) at 1,500 rpm
StarterElectric
Oil capacity:5.7 L (6 US. qt, 5 Imp. qt.)
Coolant capacity:11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesDifferential mechanical drum
Transmission model–
Transmission typeSliding gear
Gears3 forward and 1 reverse
Speed Forward: 18.9 kmh (11.7 mph) Reverse: 7.0 (4.4 mph)
Transmission oil capacity18.9 L (5 US. gal, 4.2 Imp. gal.)
Tires
Front tires Ag: 4.00-19
Rear tires Ag: 10.00-28
Three-Point Hitch
CategoryI
Control type–
Lift capacity (at ends)362 kg (800 lbs)
PTO (Power take-off shaft)
Rear PTO typeTransmission
Rear PTO speed545 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*