The Fendt 1050 Vario is a 4WD row-crop tractor from the 1000 Vario series. This tractor has been manufactured by Fendt (a part of AGCO) since 2015. The Fendt 1050 Vario is equipped with a 12.4 L (757.9 cu·in) six-cylinder diesel engine and the VarioDrive transmission with infinite forward and reverse gears.
The Fendt 1050 Vario row-crop tractor used the MAN engine. It is a 12.4 L, 12,419 cm2, (758.0 cu·in) six-cylinder turbocharged and intercooled diesel engine with 126.0 mm (4.96 in) of the cylinder bore and 166.0 mm (6.54 in) of the piston stroke. This engine produced 517 PS (380 kW; 510 HP) at 1,700 rpm of output power.
The 1050 Vario is equipped with power steering, wet disc brakes, cab with air-conditioning and mechanical suspension (available pneumatic suspension system), and 800.0 liters (211.3 US gal.; 176 Imp. gal) fuel tank.
Fendt 1050 Vario Specifications
General Specifications | |
Model | Fendt 1050 Vario |
Length | 6,150 mm (242.1 in) |
Width | 2,750 mm (108.3 in) |
Height (cab) | 3,440 mm (135.4 in) |
Wheel base | 3,290 mm (129.5 in) |
Ground clearance | 480 mm (18.9 in) |
Weight | 14,000 kg (30,865 lbs) |
Fuel tank capacity | 800.0 liters (211.3 US gal.; 176 Imp. gal) |
Exhaust fluid (DEF) tank capacity | 85.0 liters (22.5 US gal, 18.7 Imp. gal) |
Battery | Two 12V, 180Ah |
Cabin type | Cab with air-conditioning and mechanical suspension. Available pneumatic suspension system. |
Engine | |
Engine model | MAN |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 12.4 L, 12,419 cm2, (758.0 cu·in) |
Bore and stroke | 126.0 mm X 166.0 mm (4.96 in X 6.54 in) |
Horsepower | 516.8 PS (380 kW; 509.6 HP) at 1,700 rpm |
Torque | 2400 N·m (244.7 kg·m, 1768.8 ft·lb) at 1,500 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | |
Transmission type | VarioDrive |
Gears | Infinite forward and reverse |
Speed | Forward: 60.0 kmh (37.3 mph) Reverse: 33.0 (20.5 mph) |
Tires | |
Front tires | Ag: 650/65R38 |
Rear tires | Ag: 750/75R46 |
Three-Point Hitch | |
Category | IV |
Control type | – |
Lift capacity (at ends) | 5,700 kg (12,570 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1000/1000E/1300 rpm |
Hydraulic system | |
Hydraulic type | Load sensing |
Pressure | 2900 psi (199.9 bar) |
Pump flow | 43.6 gpm (165.0 lpm) 58.1 gpm (219.9 lpm) 113.6 gpm (430.0 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment