The Massey Ferguson 253 is a 2WD or 4WD utility tractor from the 200 series. This tractor was manufactured by Massey Ferguson from 1988 to 1998. The MF 253 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and one of two transmissions: a sliding gear transmission with 8 forward and 2 reverse gears or a synchronized manual shuttle transmission with 8 forward and 8 reverse gears.
The Massey Ferguson 253 utility tractor used the Perkins AT3.152.4 engine. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) three-cylinder turbocharged diesel engine with 91.0 mm (3.58 in) of the cylinder bore and 127.0 mm (5.0 in) of the piston stroke. This engine produced 57.8 PS (42.5 kW; 57.0 HP) at 2,250 rpm of output power.
The Massey Ferguson 253 is equipped with hydrostatic power steering, wet disc brakes, two-post ROPS, and 47.7 liters (12.6 US gal.; 10.5 Imp. gal) fuel tank.
Following attachments are available for the MF 253 utility tractor:
- Massey Ferguson 232 loader
- Massey Ferguson 236 loader
Massey Ferguson 253 Specifications
General Specifications | |
Model | Massey Ferguson 253 |
Length | 2WD: 3,180 mm (125.2 in) 4WD: 3,250 mm (128 in) |
Width | 2WD: 1,770 mm (69.7 in) 4WD: 1,860 mm (73.2 in) |
Height (ROPS) | 2,200 mm (86.6 in) |
Wheel base | 2WD: 1,930 mm (76 in) 4WD: 1,950 mm (76.8 in) |
Ground clearance | 2WD: 240 mm (9.4 in) 4WD: 290 mm (11.4 in) |
Weight | 2WD: 1,825 kg (4,023 lbs) 4WD: 2,145 kg (4,729 lbs) |
Fuel tank capacity | 47.7 liters (12.6 US gal.; 10.5 Imp. gal) |
Battery | 12V |
Cabin type | Two-post ROPS |
Engine | |
Engine model | Perkins AT3.152.4 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,491 cm2, (152.0 cu·in) |
Bore and stroke | 91.0 mm X 127.0 mm (3.58 in X 5 in) |
Horsepower | 57.8 PS (42.5 kW; 57.0 HP) at 2,250 rpm |
Starter | Electric |
Oil capacity: | 10.2 L (10.8 US. qt, 9 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Sliding gear |
Gears | 8 forward and 2 reverse |
Transmission model | – |
Transmission type | Synchronized manual shuttle |
Gears | 8 forward and 8 reverse |
Tires | |
Front tires | Ag: 6.50-16 (2WD), 280/80R-20 |
Rear tires | Ag: 13.6-28 (2WD), 14.9-28 (4WD) |
Three-Point Hitch | |
Category | II |
Control type | Position and draft control |
Lift capacity (at ends) | 1,190 kg (2,625 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live with two-stage clutch or independent (4WD) |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 43.0 L (11.4 US. gal, 9.5 Imp. gal.) |
Pump flow | 4.2 gpm (15.9 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment