Ford 1120

Ford 1120The Ford 1120 is a 2WD or 4WD compact utility tractor from the Twenty Compact series. This tractor was manufactured by Shibaura for Ford in Japan from 1987 to 1993. The Ford 1120 is equipped with a 0.9 L three-cylinder diesel engine and one of two transmissions: gear type transmission with 9 forward and 3 reverse gears or hydrostatic transmission with infinite (2-range) forward and reverse gears.

The Ford 1120 compact utility tractor used the Shibaura S723 engine. It is a 0.9 L, 879 cm2, (53.6 cu·in) three-cylinder natural aspirated diesel engine with 72.0 mm (2.83 in) of the cylinder bore and 72.0 mm (2.83 in) of the piston stroke. The compression ratio rating is 23.0:1. This engine produced 20 PS (14.7 kW; 19.7 HP) at 2,500 rpm of maximum output power.

The Ford 1120 is equipped with manual or power (optional) steering, expanding shoe brakes, open operator station with two-post ROPS and 18.2 liters (4.8 US gal.; 4 Imp. gal) fuel tank.

Following attachments are available for the Ford 1120 compact utility tractor:

  • Mid-mount Ford 914: 48 in (1,210 mm) mower deck
  • Front-mount Ford 702C: 60 in (1,520 mm) blade
  • Front-mount Ford 715A: 51 in (1,290 mm) snowblower
  • Ford 7106 loader
  • Ford 756B backhoe

Ford 1120 Specifications

General Specifications
ModelFord 1120
Length2,700 mm (106.3 in)
Width1,030 mm (40.6 in)
Height2,030 mm (79.9 in)
Wheel base1,400 mm (55.1 in)
Weight 2WD: 605 kg (1,335 lbs)
4WD: 650 kg (1,430 lbs)
Fuel tank capacity18.2 liters (4.8 US gal.; 4 Imp. gal)
Battery12V
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelShibaura S723
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement0.9 L, 879 cm2, (53.6 cu·in)
Bore and stroke72.0 mm X 72.0 mm (2.83 in X 2.83 in)
Compression ratio23.0:1
Horsepower20 PS (14.7 kW; 19.7 HP) at 2,500 rpm
StarterElectric
Injection timing23-24° BTDC
Injector opening pressure1,705 psi (11,760 kPa)
Oil capacity:3.3 L (3.49 US qts., 2.9 Imp. qts.)
Coolant capacity:3.5 L (3.7 US qts., 3.1 Imp. qts)
Intake/Exhaust valve clearance0.20 mm (0.008 in)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeManual or power (optional)
BrakesExpanding shoe
Transmission model
Transmission typeGear type
Gears9 forward and 3 reverse
Transmission model
Transmission typeHydrostatic
GearsInfinite (2-range) forward and reverse
Tires
Front tiresAg: 4.00-12 (2WD), 5-12 (4WD)
Rear tiresAg: 8-16
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at ends)640 kg (1,410 lbs)
PTO (Power take-off shaft)
Middle PTO typeOptional
Middle PTO speed2,000 rpm
Rear PTO typeTransmission or live (option)
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow4.7 gpm (17.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*