The International Harvester 756 is a 2WD or 4WD utility tractor manufactured by International Harvester in Rock Island, Illinois, USA (ended in 1971) or Geelong, Australia from 1967 to 1983.
The International Harvester 756 is equipped with one of two engines: a 4.8 L (291.0 cu·in) six-cylinder gasoline engine or a 5.1 L (310.0 cu·in) six-cylinder diesel engine and a transmission with 8 forward and 4 reverse gears.
The tractor could be equipped with the following engines:
- International Harvester C291. It is a 4.8 L, 4,768 cm2, (291.0 cu·in) six-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke.
- Interntional Harvester D310. It is a 5.1 L, 5,080 cm2, (310.0 cu·in) six-cylinder natural aspirated diesel engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 111.0 mm (4.37 in).
International Harvester 756 Specifications
General Specifications | |
Model | International Harvester 756 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,560 mm (100.8 in) |
Weight | 3,800 kg (8,378 lbs) |
Fuel tank capacity | 125.0 liters (33 US gal.; 27.5 Imp. gal) |
Battery | – |
Cabin type | Open operator station |
Engine | |
Engine model | International Harvester C291 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Gasoline |
Displacement | 4.8 L, 4,768 cm2, (291.0 cu·in) |
Bore and stroke | 95.0 mm X 112.0 mm (3.74 in X 4.41 in) |
Horsepower | – |
Starter | Electric |
Engine | |
Engine model | Interntional Harvester D310 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 5.1 L, 5,080 cm2, (310.0 cu·in) |
Bore and stroke | 98.0 mm X 111.0 mm (3.86 in X 4.37 in) |
Horsepower | 0 PS ( kW; 0 HP) at rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | – |
Brakes | – |
Transmission model | – |
Transmission type | – |
Gears | 8 forward and 4 reverse |
Tires | |
Front tires | Ag: 9.5L-15 |
Rear tires | Ag: 18.4-34 |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Pump flow | 12.0 gpm (45.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment