International Harvester 756

International Harvester 756The International Harvester 756 is a 2WD or 4WD utility tractor manufactured by International Harvester in Rock Island, Illinois, USA (ended in 1971) or Geelong, Australia from 1967 to 1983.

The International Harvester 756 is equipped with one of two engines: a 4.8 L (291.0 cu·in) six-cylinder gasoline engine or a 5.1 L (310.0 cu·in) six-cylinder diesel engine and a transmission with 8 forward and 4 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester C291. It is a 4.8 L, 4,768 cm2, (291.0 cu·in) six-cylinder natural aspirated gasoline engine with 95.0 mm (3.74 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke.
  • Interntional Harvester D310. It is a 5.1 L, 5,080 cm2, (310.0 cu·in) six-cylinder natural aspirated diesel engine. The cylinder bore is 98.0 mm (3.86 in) and the piston stroke is 111.0 mm (4.37 in).

International Harvester 756 Specifications

General Specifications
ModelInternational Harvester 756
Length
Width
Height
Wheel base2,560 mm (100.8 in)
Weight3,800 kg (8,378 lbs)
Fuel tank capacity125.0 liters (33 US gal.; 27.5 Imp. gal)
Battery
Cabin typeOpen operator station
Engine
Engine modelInternational Harvester C291
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeGasoline
Displacement4.8 L, 4,768 cm2, (291.0 cu·in)
Bore and stroke95.0 mm X 112.0 mm (3.74 in X 4.41 in)
Horsepower
StarterElectric
Engine
Engine modelInterntional Harvester D310
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement5.1 L, 5,080 cm2, (310.0 cu·in)
Bore and stroke98.0 mm X 111.0 mm (3.86 in X 4.37 in)
Horsepower0 PS ( kW; 0 HP) at rpm
StarterElectric
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering type
Brakes
Transmission model
Transmission type
Gears8 forward and 4 reverse
Tires
Front tires Ag: 9.5L-15
Rear tires Ag: 18.4-34
Three-Point Hitch
CategoryII
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow12.0 gpm (45.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*