The Allis Chalmers 7080 is a 2WD row-crop tractor manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1975 to 1981. The Allis Chalmers 7080 is equipped with a 7.0 L (426.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 20 forward and 4 reverse gears.
The Allis Chalmers 7080 row-crop tractor used the Allis Chalmers 670HI engine. It is a 7.0 L, 6,980 cm2, (426.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 108.0 mm (4.25 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 213 PS (156.6 kW; 210.0 HP) at 2,550 rpm of output power.
The Allis Chalmers 7080 is equipped with hydrostatic power steering, differential hydraulic wet discs brakes, Accousta cab or four-post ROPS canopy (optional), and 242.2 liters (64 US gal.; 53.3 Imp. gal) fuel tank.
Allis Chalmers 7080 Specifications
General Specifications | |
Model | Allis Chalmers 7080 |
Length | 4,140 mm (163 in) |
Width | 2,420 mm (95.3 in) |
Height (exhaust) | 2,970 mm (116.9 in) |
Wheel base | 2,690 mm (105.9 in) |
Weight | 6,190 kg (13,647 lbs) |
Fuel tank capacity | 242.2 liters (64 US gal.; 53.3 Imp. gal) |
Battery | 12V |
Cabin type | Accousta cab or Four-post ROPS canopy (optional) |
Engine | |
Engine model | Allis Chalmers 670HI |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 7.0 L, 6,980 cm2, (426.0 cu·in) |
Bore and stroke | 108.0 mm X 127.0 mm (4.25 in X 5 in) |
Compression ratio | 16.0:1 |
Horsepower | 213 PS (156.6 kW; 210.0 HP) at 2,550 rpm |
Starter | Electric |
Oil capacity: | 23.7 L (25 US. qt, 20.9 Imp. qt.) |
Coolant capacity: | 34.1 L (36 US. qt, 30 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet discs |
Final drive | Inboard planetary |
Transmission model | Power Director |
Transmission type | Partial power shift |
Gears | 20 forward and 4 reverse |
Speed | Forward: 29.4 kmh (18.3 mph) Reverse: 13.2 (8.2 mph) |
Transmission oil capacity | 28.0 L (7.4 US. gal, 6.2 Imp. gal.) |
Tires | |
Front tires | Ag: 14L-16 |
Rear tires | Ag: 20.8-38 |
Three-Point Hitch | |
Caterogy | III/II |
Control type | – |
Lift capacity (at 610 mm / 24 in) | 3,030 kg (6,680 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1,000 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
Valves | 2 |
Pump flow | 23.0 gpm (87.1 lpm) |
Steering flow | 10.0 gpm (37.9 lpm) |
Total flow | 47.0 gpm (177.9 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment