The Allis Chalmers 200 is a 2WD row-crop tractor manufactured by the Allis Chalmers from 1972 to 1975. The Allis Chalmers 200 is equipped with 4.9 L six-cylinder diesel engine and constant mesh-helical gears transmission with 8 forward and 2 reverse gears.
The Allis Chalmers 200 row-crop tractor used 4.9 L, 4933 cm2, (301 cu·in) six-cylinder turbocharged diesel engine with 98.0 mm (3.86 in) of cylinder bore and 108.0 mm (4.25 in) of piston stroke. The compression ratio rating is 16.0:1.
The Allis Chalmers 200 is equipped with hydraulic power steering, ball actuated disc brakes, open operator station. and 182 liters (48.1 US gal.; 40 Imp. gal) fuel tank.
Allis Chalmers 200 Specifications
| General Specifications | |
| Model | Allis Chalmers 200 |
| Length | 4,450 mm (175.2 in) |
| Width | 2,220 mm (87.4 in) |
| Height | 2,980 mm (117.3 in) |
| Wheel base | – |
| Weight | 3,320 kg (7,320 lbs) |
| Fuel tank capacity | 182 liters (48.1 US gal.; 40 Imp. gal) |
| Battery | One or two 12V |
| Cabin type | Open operator station. |
| Engine | |
| Engine model | Allis Chalmers |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 6 |
| Fuel type | Diesel |
| Displacement | 4.9 L, 4,933 cm2, (301 cu·in) |
| Bore and stroke | 98.0 mm X 108.0 mm (3.86 in X 4.25 in) |
| Compression ratio | 16.0:1 |
| Horsepower | 0 PS ( kW; 0 HP) at rpm |
| Starter | electric |
| Oil capacity: | 14.2 L (15 US. qt, 12.49 Imp. qt.) |
| Coolant capacity: | 17.0 L (17.96 US. qt, 14.96 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Hydraulic power |
| Brakes | Ball actuated disc |
| Transmission model | |
| Transmission type | Constant mesh-helical gears |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 24.9 kmh (15.5 mph) Reverse: 7.2 (4.5 mph) |
| Transmission oil capacity | 36.0 L (38.04 US. qt, 31.68 Imp. qt.) |
| Tires | |
| Front tires | Ag: 7.50-16 |
| Rear tires | Ag: 16.9-34 |
| Three-Point Hitch | |
| Caterogy | II |
| Control type | – |
| Lift capacity | 2,090 kg (4,608 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | – |
| Rear PTO spped | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Hydraulic capacity | 26.5 L (28 US. qt, 23.32 Imp. qt.) |
| Pressure | 2,300 psi (158.6 bar) |
| Valves | 2 |
| Pump flow | 17.2 gpm (65.1 lpm) |
| Total flow | 21.0 gpm (79.5 lpm) |
Be the first to comment