Allis Chalmers C

Allis Chalmers CThe Allis Chalmers C is a 2WD row-crop tractor manufactured by Allis Chalmers in West Allis, Wisconsin, USA from 1940 to 1949. The Allis Chalmers C is equipped with a 2.1 L (125.2 cu·in) four-cylinder gasoline engine and a non-synchronized gear transmission with 3 forward and 1 reverse gears.

The Allis Chalmers C row-crop tractor used the Allis Chalmers CE engine. It is a 2.1 L, 2,052 cm2, (125.2 cu·in) four-cylinder natural aspirated gasoline/distillate engine with 86.0 mm (3.39 in) of the cylinder bore and 89.0 mm (3.5 in) of the piston stroke. The compression ratio rating is 4.75:1 for distillate or 5.7:1 for the gasoline version.

The Allis Chalmers C is equipped with manual steering, mechanical drum brakes, open operator station, and 49.2 liters (13 US gal.; 10.8 Imp. gal) fuel tank.

Allis Chalmers C Specifications

General Specifications
ModelAllis Chalmers C
Length2,890 mm (113.8 in)
Width1,730 mm (68.1 in)
Height1,600 mm (63 in)
Wheel base1,950 mm (76.8 in)
Weight1,134 kg (2,500 lbs)
Fuel tank capacity49.2 liters (13 US gal.; 10.8 Imp. gal)
Battery6V, 95Ah
Cabin typeOpen operator station
Engine
Engine modelAllis Chalmers CE
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline / Distillate
Displacement2.1 L, 2,052 cm2, (125.2 cu·in)
Bore and stroke86.0 mm X 89.0 mm (3.39 in X 3.5 in)
Compression ratio Distillate: 4.75:1
Gasoline: 5.7:1
Horsepower
StarterElectric
Oil typeSAE 20W
Oil capacity:3.8 L (4 US. qt, 3.3 Imp. qt.)
Coolant capacity:7.6 L (8 US. qt, 6.7 Imp. qt.)
Spark plugAutolite A9, AC 47
Transmission and chassis
Chassis4×2 2WD
Steering typeManual
BrakesMechanical drum
Transmission model
Transmission typeNon-synchronized gear
Gears3 forward and 1 reverse
Speed Forward: 12.1 kmh (7.5 mph) Reverse: 4.8 (3 mph)
Transmission oil capacity5.7 L (1.5 US. gal, 1.3 Imp. gal.)
Tires
Front tiresAg: 4.00-15
Rear tiresAg: 9.00-24
PTO (Power take-off shaft)
Rear PTO typeTransmission
Rear PTO speed560 rpm
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

2 Comments

Leave a Reply

Your email address will not be published.


*