Bobcat CT230

Bobcat CT230The Bobcat CT230 is a 4WD compact utility tractor manufactured by Daedong for distributor Bobcat in Daegu, South Korea from 2008 to 2013. The Bobcat CT230 is equipped with a 1.5 L (91.5 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite (3-range) forward and reverse gears.

The Bobcat CT230 compact utility tractor used the Daedong engine. It is a 1.5 L, 1,499 cm2, (91.5 cu·in) three-cylinder natural aspirated diesel engine. This engine produced 30.5 PS (22.4 kW; 30.0 HP) of output power.

The Bobcat CT230 is equipped with hydrostatic power steering, two-post foldable ROPS, and 30,0 liters (7.9 US gal.; 6.6 Imp. gal) fuel tank.

Following attachments are available for the Bobcat CT230 compact utility tractor:

  • Mid-mount Bobcat 66 in (1,670 cm) mower deck with 3-blades and hydraulic lift
  • Front-mount Bobcat FCTSB49 49 in (1,240 cm) two-stage snow blower with hydraulic lift
  • Front-mount Bobcat FCTSB62 62 in (1,570 cm) two-stage snow blower with hydraulic lift
  • Bobcat 7TL loader
  • Bobcat 6TB backhoe
  • Bobcat 7TB backhoe

Bobcat CT230 Specifications

General Specifications
ModelBobcat CT230
Length3,000 mm (118.1 in)
Width1,410 mm (55.5 in)
Height2,430 mm (95.7 in)
Wheel base1,670 mm (65.7 in)
Ground clearance250 mm (9.8 in)
Weight1,385 kg (3,053 lbs)
Fuel tank capacity30,0 liters (7.9 US gal.; 6.6 Imp. gal)
Battery12V
Cabin typeTwo-post foldable ROPS
Engine
Engine modelDaedong
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.5 L, 1,499 cm2, (91.5 cu·in)
Bore and stroke
Horsepower30.5 PS (22.4 kW; 30 HP) at rpm
StarterElectric
Transmission and chassis
Chassis4×4 MFWD 4WD
Steering typeHydrostatic power
Brakes
Transmission model
Transmission typeHydrostatic
GearsInfinite (3-range) forward and reverse
Speed Forward: 21.0 kmh (13.1 mph) Reverse: 13.2 (8.2 mph)
Tires
Front tires Ag: 7×14
Lawn/turf: 25×8.5-16
Rear tiresAg: 11.2×24
Lawn/turf: 13.6×16
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at 610 mm / 24 in) 555 kg (1,225 lbs)
With loader: 635 kg (1,400 lbs)
PTO (Power take-off shaft)
Middle PTO typeOptional
Middle PTO speed2,000 rpm
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Valves1 to 2
Pump flow8.2 gpm (31 lpm)
Steering flow4.5 gpm (17 lpm)
Total flow12.7 gpm (48.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*