The CaseIH 385 is a 2WD or 4WD utility tractor from the 85 Utility series. This tractor was manufactured by CaseIH in Doncaster, England from 1985 to 1990. The CaseIH 385 is equipped with a 2.5 L (155.0 cu·in) three-cylinder diesel engine and one of three transmissions: a synchromesh transmission with 8 forward and 4 reverse gears, a partial power shift transmission with 16 forward and 8 reverse gears or a power shuttle transmission with 8 forward and 8 reverse gears.
The CaseIH 385 utility tractor used the CaseIH D-155 engine. It is a 2.5 L, 2,540 cm2, (155.0 cu·in) three-cylinder natural aspirated diesel engine with 97.0 mm (3.82 in) of the cylinder bore and 109.0 mm (4.29 in) of the piston stroke. The compression ratio rating is 16.0:1. This engine produced 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm of output power.
The CaseIH 385 is equipped with power steering, hydraulic wet disc brakes, two-post ROPS, canopy or deluxe canopy (optional), and 75.7 liters (20 US gal, 16.7 Imp. gal) fuel tank.
CaseIH 385 Specifications
General Specifications | |
Model | CaseIH 385 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,020 mm (79.5 in) |
Weight (shipping) | Utility: 2,235 kg (4,930 lbs) Low profile: 2,210 kg (4,870 lbs) 4WD: 2,695 kg (5,940 lbs) |
Fuel tank capacity | 75.7 liters (20 US gal, 16.7 Imp. gal) |
Battery | 12V, 93 Ah |
Cabin type | Two-post ROPS, canopy or deluxe canopy (optional) |
Engine | |
Engine model | CaseIH D-155 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,540 cm2, (155.0 cu·in) |
Bore and stroke | 97.0 mm X 109.0 mm (3.82 in X 4.29 in) |
Compression ratio | 16.0:1 |
Horsepower | 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm |
Torque | 161.4 N·m (16.5 kg·m, 119 ft·lb) at 1,650 rpm |
Starter | Electric |
Oil capacity: | 7.6 L (8 US. qt, 6.7 Imp. qt.) |
Coolant capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Transmission model | – |
Transmission type | Synchromesh |
Gears | 8 forward and 4 reverse |
Speed | Forward: 25.0 kmh (15.5 mph) Reverse: 7.9 (4.9 mph) |
Transmission model | – |
Transmission type | Partial power shift |
Gears | 16 forward and 8 reverse |
Speed | Forward: 25.0 kmh (15.5 mph) Reverse: 7.9 (4.9 mph) |
Transmission model | – |
Transmission type | Power shuttle |
Gears | 8 forward and 8 reverse |
Speed | Forward: 24.2 kmh (15 mph) Reverse: 30.4 (18.9 mph) |
Tires | |
Front tires | Ag: 6.00-16 (2WD), 8.3-24 (4WD) |
Rear tires | Ag: 13.6-28 (2WD), 14.9-28 (4WD) |
Three-Point Hitch | |
Category | II/I |
Control type | – |
Lift capacity (at 610 mm/24 in) | 980 kg (2161 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 34.1 L (9 US. gal, 7.5 Imp. gal.) |
Pressure | 2500 psi (172.4 bar) |
Valves | 0 to 2 |
Steering flow | 2.5 gpm (9.5 lpm) |
Total flow | 14.3 gpm (54.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment