The CaseIH C50 is a 2WD or 4WD utility tractor from the CX Utility series. This tractor was manufactured by CaseIH in Doncaster, England from 1998 to 2002. The CaseIH C50 is equipped with a 2.7 L (165.0 cu·in) three-cylinder diesel engine and three transmission varians.
The Case IH C50 utility tractor used the Perkins 903.27 engine. It is a 2.7 L, 2,704 cm2, (165.0 cu·in) three-cylinder natural aspirated diesel engine with 95.0 mm (3.74 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 17.25:1. This engine produced 53.7 PS (39.5 kW; 53.0 HP) at 2,250 rpm of output power and 189.8 N·m (19.4 kg·m, 139.9 ft·lb) at 1,200 rpm of torque.
The CaseIH C50 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, Two-post ROPS with straddle platform, and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.
Following attachments are available for the CaseIH C50 utility tractor:
- CaseIH 2200 loader
- CaseIH 2250 loader
CaseIH C50 Specifications
| General Specifications | |
| Model | CaseIH C50 |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 2WD: 2,050 mm (80.7 in) 4WD: 2,110 mm (83.1 in) |
| Weight | 3,445 kg (7,595 lbs) |
| Fuel tank capacity | 75.7 liters (20 US gal.; 16.7 Imp. gal) |
| Battery | 12V, CCA 650A or 810A (optional) |
| Cabin type | Two-post ROPS with straddle platform |
| Engine | |
| Engine model | Perkins 903.27 |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 2.7 L, 2,704 cm2, (165.0 cu·in) |
| Bore and stroke | 95.0 mm X 127.0 mm (3.74 in X 5 in) |
| Compression ratio | 17.25:1 |
| Horsepower | 53.7 PS (39.5 kW; 53.0 HP) at 2,250 rpm |
| Torque | 189.8 N·m (19.4 kg·m, 139.9 ft·lb) at 1,200 rpm |
| Starter | Electric |
| Oil capacity: | 7.6 L (8 US. qt, 6.7 Imp. qt.) |
| Coolant capacity: | 11.9 L (12.6 US. qt, 10.5 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Hydrostatic power |
| Brakes | Differential hydraulic wet disc |
| Differential lock | Mechanical |
| Transmission model | – |
| Transmission type | – |
| Gears | 8 forward and 4 reverse |
| Transmission oil capacity | 2WD: 34.1 L (9 US. gal, 7.5 Imp. gal.) 4WD: 36.5 L (9.6 US. gal, 8 Imp. gal.) |
| Transmission model | – |
| Transmission type | Partial power shift |
| Gears | 16 forward and 8 reverse |
| Speed | Forward: 31.8 kmh (19.8 mph) Reverse: 29.1 kmh (18.1 mph) |
| Transmission oil capacity | 2WD: 34.1 L (9 US. gal, 7.5 Imp. gal.) 4WD: 36.5 L (9.6 US. gal, 8 Imp. gal.) |
| Transmission model | – |
| Transmission type | – |
| Gears | 8 forward and 8 reverse |
| Transmission oil capacity | 2WD: 34.1 L (9 US. gal, 7.5 Imp. gal.) 4WD: 36.5 L (9.6 US. gal, 8 Imp. gal.) |
| Tires | |
| Front tires | Ag: 7.50-16 |
| Rear tires | Ag: 14.9-28 |
| Three-Point Hitch | |
| Category | II/I |
| Control type | Mechanical |
| Lift capacity (at ends) | 1,660 kg (3,660 lbs) Optional: 2,310 kg (5,100 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent with hydraulic wet disc clutch |
| Rear PTO speed | 540 or 540/1000 rpm (optional dual shaft) |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2500 psi (172.4 bar) |
| Valves | 0 to 3 |
| Pump flow | 12.7 gpm (48.1 lpm) |
| Total flow | 15.7 gpm (59.4 lpm) |
Be the first to comment