The Challenger MT743 is a 2WD agricultural crawler from the MT700 series. This tractor has been manufactured by Challenger (a part of AGCO) in Jackson, Minnesota, USA since 2018. The Challenger MT743 is equipped with a 9.8 L (598.0 cu·in) seven-cylinder diesel engine and a infinitely-variable transmission (IVT) transmission with infinite forward and reverse gears.
The Challenger MT743 agricultural crawler used the AGCO Power 9.8 L engine. It is a 9.8 L, 9,799 cm2, (598.0 cu·in) seven-cylinder natural aspirated diesel engine with 111.0 mm (4.37 in) of the cylinder bore and 145.0 mm (5.71 in) of the piston stroke. This engine produced 431.0 PS (317.0 kW; 425.0 HP) at 1,700 rpm of output power.
The Challenger MT743 is equipped with power steering, cab (standard), and 681.3 liters (180 US gal.; 149.9 Imp. gal) fuel tank.
Challenger MT743 Specifications
General Specifications | |
Model | Challenger MT743 |
Length | – |
Width | – |
Height | – |
Wheel base | – |
Weight | 15,170 kg (33,444 lbs) |
Fuel tank capacity | Standard: 681.3 liters (180 US gal.; 150 Imp. gal) Optional: 813.8 liters (215 US gal.; 179 Imp. gal) Optional: 972.7 liters (257 US gal.; 214 Imp. gal) |
Exhaust fluid (DEF) | 79.5 liters (21 US gal.; 17.5 Imp. gal) |
Battery | 12V |
Cabin type | Cab (standard) |
Engine | |
Engine model | AGCO Power 9.8 L |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 7 |
Fuel type | Diesel |
Displacement | 9.8 L, 9,799 cm2, (598.0 cu·in) |
Bore and stroke | 111.0 mm X 145.0 mm (4.37 in X 5.71 in) |
Horsepower | 431.0 PS (317.0 kW; 425.0 HP) at 1,700 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | Crawler |
Steering type | Power |
Brakes | – |
Transmission model | Accu-VT Stepless / TA 300T |
Transmission type | Infinitely-variable transmission (IVT) |
Gears | Infinite forward and reverse |
Speed | Forward: 40.0 kmh (24.9 mph) Reverse: 14.0 kmh (8.7 mph) |
Tracks | |
General ag tracks | 16, 18, 20, 25, 30 & 34 in |
Extreme ag tracks | 25, 30 & 34 in |
Three-Point Hitch | |
Category | III/IVN |
Control type | – |
Lift capacity | 8,618 kg (19,000 lbs) |
Hydraulic system | |
Hydraulic type | Load sensing |
Valves | 4 to 6 |
Pump flow | 58.0 gpm (219.6 lpm) 116.0 gpm (439.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment