The Claas Axion 880 is a 4WD row-crop tractor from the Axion series. This tractor has been manufactured by Claas since 2018. The Claas Axion 880 is equipped with a 6.7 L (410.6 cu·in) six-cylinder diesel engine and a continuously variable transmission with infinite forward and reverse gears.
The Claas Axion 880 row-crop tractor used the FPT 6.7 engine. It is a 6.7 L, 6,735 cm2, (411.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 132.0 mm (5.2 in) of the piston stroke. This engine produced 268.7 PS (197.6 kW; 265.0 HP) of output power.
The Claas Axion 880 is equipped with power steering, wet disc brakes, Cab with air-conditioning, and 454.3 liters (120 US gal, 100.0 Imp. gal) fuel tank and diesel exhaust fluid tank of 41.6 liters (11.0 US gal, 9.2 Imp. gal).
Claas Axion 880 Specifications
General Specifications | |
Model | Claas Axion 880 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,972 mm (117 in) |
Weight | 10,910 kg (24,052 lbs) |
Fuel tank capacity | 454.3 liters (120 US gal, 100.0 Imp. gal) Diesel exhaust fluid (DEF): 41.6 liters (11.0 US gal, 9.2 Imp. gal) |
Battery | |
Cabin type | Cab with air-conditioning |
Engine | |
Engine model | FPT 6.7 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6.7 L, 6,735 cm2, (411.0 cu·in) |
Bore and stroke | 104.0 mm X 132.0 mm (4.09 in X 5.2 in) |
Horsepower | 268.7 PS (197.6 kW; 265.0 HP) |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Wet disc |
Transmission model | CMATIC |
Transmission type | Continuously variable transmission |
Gears | Infinite forward and reverse |
Tires | |
Front tires | Ag: 380/80 R38 |
Rear tires | Ag: 480/80 R50 (dual) |
Three-Point Hitch | |
Caterogy | III |
Control type | – |
Lift capacity (at ends) | 9730 kg (21455 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | – |
Valves | 4 or 5 |
Pump flow | 40.0 gpm (151.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment