The Cub Cadet 106 is a 2WD garden tractor from the 1X6/1X7 series. This tractor was manufactured by Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA from 1969 to 1971. The Cub Cadet 106 is equipped with a 0.4 L (23.9 cu·in) single-cylinder gasoline engine and a gear type with dry disc clutch transmission with 3 forward and 1 reverse gears or 6 forward and 2 reverse gears with creeper.
The Cub Cadet 106 garden tractor used the Kohler K241A engine. It is a 0.4 L, 391 cm2, (23.9 cu·in) single-cylinder natural aspirated gasoline engine with 83.0 mm (3.27 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. The compression ratio rating is 7.0:1. This engine produced 10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm of output power and 22.0 N·m (2.2 kg·m, 16.2 ft·lb) at 2,200 rpm of torque.
The Cub Cadet 106 is equipped with manual steering, dry disc brakes, open operator station, and 6.2 liters (1.6 US gal.; 1.4 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet 106 garden tractor:
- Mid-mount Cub Cadet: 960 mm (38 in) mower deck with 3-blades and manual or electric (optional) lift
- Mid-mount Cub Cadet: 1,060 mm (42 in) mower deck with 3-blades and manual or electric (optional) lift
- Mid-mount Cub Cadet: 1,210 mm (48 in) mower deck with 3-blades and manual or electric (optional) lift
- Front-mount Cub Cadet 1,060 mm (42 in) blade with manual lift
- Front-mount Cub Cadet QA-36 910 mm (36 in) snow blower with manual lift
- Front-mount Cub Cadet QA-42 1,060 mm (42 in) snow blower with manual lift
Cub Cadet 106 Specifications
| General Specifications | |
| Model | Cub Cadet 106 |
| Length | 1,620 mm (63.8 in) |
| Width | 840 mm (33.1 in) |
| Height | 1,000 mm (39.4 in) |
| Wheel base | 1,090 mm (42.9 in) |
| Ground clearance | 150 mm (5.9 in) |
| Weight | 281 kg (619 lbs) |
| Fuel tank capacity | 6.2 liters (1.6 US gal.; 1.4 Imp. gal) |
| Battery | 12V |
| Cabin type | Open operator station |
| Engine | |
| Engine model | Kohler K241A |
| Engine type | Four-stroke, air-cooled, inline |
| Cylinders | 1 |
| Fuel type | Gasoline |
| Displacement | 0.4 L, 391 cm2, (23.9 cu·in) |
| Bore and stroke | 83.0 mm X 73.0 mm (3.27 in X 2.87 in) |
| Compression ratio | 7.0:1 |
| Horsepower | 10.2 PS (7.5 kW; 10.0 HP) at 3,600 rpm |
| Torque | 22.0 N·m (2.2 kg·m, 16.2 ft·lb) at 2,200 rpm |
| Starter | Electric |
| Oil capacity: | 1.4 L (1.5 US. qt, 1.2 Imp. qt.) |
| Spark plug | Champion H-10 |
| Transmission and chassis | |
| Chassis | 4×2 2WD |
| Steering type | Manual |
| Brakes | Dry disc |
| Transmission model | |
| Transmission type | Gear type with dry disc clutch |
| Gears | 3 forward and 1 reverse |
| Speed | Forward: 10.9 kmh (6.8 mph) Reverse: 4.0 (2.5 mph) |
| Transmission oil capacity | 3.3 L (0.9 US. gal, 0.7 Imp. gal.) |
| Tires | |
| Front tires | Lawn/turf: 4.80×4.00-8 |
| Rear tires | Lawn/turf: 6-12 |
| Three-Point Hitch | |
| Caterogy | Cub Cadet three-point |
| Control type | – |
| Lift capacity (at ends) | – |
| PTO (Power take-off shaft) | |
| Front PTO type | Independent |
| Front PTO speed | 3.600 rpm |
| Rear PTO type | Transmission with dry disc clutch |
| Rear PTO speed | 515 rpm |
Be the first to comment