The Cub Cadet 1250 is a 2WD garden tractor from the Quietline series. This tractor was manufactured by the Cub Cadet (a part of International Harvester) in Louisville, Kentucky, USA from 1974 to 1980. The Cub Cadet 1250 is equipped with a 0.5 L single-cylinder gasoline engine and hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet 1250 garden tractor used the Kohler K301AQS engine. It is a 0.5 L, 476 cm2, (29.0 cu·in) single-cylinder natural aspirated gasoline engine with 85.7 mm (3.37 in) of the cylinder bore and 82.6 mm (3.25 in) of the piston stroke. The Kohler K301AQS used the Kohler side-draft carburetor and dry type air cleaner. This engine produced 12.1 PS (8.9 kW; 12.0 HP) at 3,400 rpm of maximum output power.
The Cub Cadet 1250 is equipped with manual steering, dry disc brakes (wet disc after 1977), open operator station and 7.5 liters (2 US gal.; 1.6 Imp. gal) fuel tank.
Following attachments are available for Cub Cadet 1250 garden tractor:
- Mid-mount Cub Cadet 38A 38 in (960 mm) mower deck with 3-blades and manual or hydraulic (optional) lift
- Mid-mount Cub Cadet 44A 44 in (1,110 mm) mower deck with 3-blades and manual or hydraulic (optional) lift
- Mid-mount Cub Cadet 50A 50 in (1,270 mm) mower deck with 3-blades and manual or hydraulic (optional) lift
Cub Cadet 1250 Specifications
General Specifications | |
Model | Cub Cadet 1250 |
Length | 1,750 mm (68.9 in) |
Width | 930 mm (36.6 in) |
Height | 1,040 mm (40.9 in) |
Wheel base | 1,110 mm (43.7 in) |
Weight | – |
Fuel tank capacity | 7.5 liters (2 US gal.; 1.6 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | Kohler K301AQS |
Engine type | Four-stroke, air-cooled, inline |
Cylinders | 1 |
Fuel type | Gasoline |
Displacement | 0.5 L, 476 cm2, (29.0cu·in) |
Bore and stroke | 85.7 mm X 82.6 mm (3.37 in X 3.25 in) |
Horsepower | 12.1 PS (8.9 kW; 12.0 HP) at 3,400 rpm |
Starter | Electric |
Oil type | API SF or SG |
Oil capacity: | 1.4 L (1.48 US. qt, 1.23 Imp. qt.) |
Spark plug | Champion RH10 |
Spark plug gap | 0.9 mm (0.035 in) |
Intake valve clearanced | 0.254 mm (0.010 in) |
Exhaust valve clearanced | 0.508 mm (0.020 in) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc and Wet disc after 1977 |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 12.9 kmh (8 mph) Reverse: 6.4 (4 mph) |
Transmission oil capacity | 6.6 L (6.97 US. qt, 5.81 Imp. qt.) |
Tires | |
Front tires | Lawn/turf: 4.80/4.00-8 |
Rear tires | Lawn/turf: 23×8.50-12 |
PTO (Power take-off shaft) | |
Front PTO type | Independent with electric clutch |
Front PTO spped | 3,400 rpm |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment