The Cub Cadet LT 1022 is a 2WD lawn tractor from the LT 1000 series. This tractor was manufactured by Cub Cadet (a part of MTD) during 2004. The Cub Cadet LT 1022 is equipped with a 0.7 L (40.0 cu·in) two-cylinder gasoline engine and a belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet LT1022 lawn tractor used the Briggs & Stratton 40H777 engine. It is a 0.7 L, 655 cm2, (40.0 cu·in) two-cylinder natural aspirated gasoline engine with 75.0 mm (2.95 in) of the cylinder bore and 73.0 mm (2.87 in) of the piston stroke. The compression ratio rating is 8.5:1. This engine produced 22.3 PS (16.4 kW; 22.0 HP) at 3,600 rpm of output power.
The Cub Cadet LT 1022 is equipped with manual steering, dry disc brakes, an open operator station, and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet LT 1022 lawn tractor:
- Mid-mount Cub Cadet 1,160 mm (46 in) mower deck
- Mid-mount Cub Cadet 190-674 1,160 mm (46 in) blade
- Front-mount Cub Cadet 190-673 1,060 mm (42 in) two-stage snow blower
Cub Cadet LT 1022 Specifications
General Specifications | |
Model | Cub Cadet LT1022 |
Length | 1,720 mm (67.7 in) |
Width | 1,240 mm (48.8 in) |
Height (steering wheel) | 1,090 mm (42.9 in) |
Wheel base | 1,190 mm (46.9 in) |
Ground clearance | 110 mm (4.3 in) |
Weight | 230 kg (507 lbs) |
Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
Battery | 12V, CCA 270A |
Cabin type | Open operator station |
Engine | |
Engine model | Briggs & Stratton 40H777 |
Engine type | Four-stroke, air-cooled |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 655 cm2, (40.0 cu·in) |
Bore and stroke | 75.0 mm X 73.0 mm (2.95 in X 2.87 in) |
Compression ratio | 8.5:1 |
Horsepower | 22.3 PS (16.4 kW; 22.0 HP) at 3,600 rpm |
Torque | 42.8 N·m (4.4 kg·m, 31.5 ft·lb) at 2,400 rpm |
Starter | Electric |
Oil capacity: | 1.9 L (2 US. qt, 1.7 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Dry disc |
Transmission model | Hydro-Gear 311-0510 |
Transmission type | Belt-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 8.4 kmh (5.2 mph) Reverse: 3.7 kmh (2.3 mph) |
Tires | |
Front tires | Lawn/turf: 15x6x6 |
Rear tires | Lawn/turf: 20x9x8 |
PTO (Power take-off shaft) | |
Front PTO type | Independent with electric clutch |
Front PTO speed | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment