The Cub Cadet XT1 LT42 is a 2WD lawn tractor from the XT1 Enduro Series. This tractor has been manufactured by the Cub Cadet (a part of MTD) since 2015. The Cub Cadet XT1 LT42 is equipped with 0.6 L single-cylinder Kohler SV541 gasoline engine and Tuff Torq K46 belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet XT1 LT42 lawn tractor used Kohler SV541 engine. It is a 0.6 L, 596 cm2, (36.4 cu·in) single-cylinder gasoline engine with 94.0 mm (3.7 in) of cylinder bore and 86.0 mm (3.39 in) of piston stroke. The compression ratio rating is 8.5:1. This engine produced 18.2 PS (13.4 kW; 18 HP) at 3,600 rpm of maximum output power.
The Cub Cadet XT1 LT42 is equipped with manual steering, disc brakes, open operator station and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Following attachments are available for Cub Cadet XT1 LT42 lawn tractor:
- Mid-mount Cub Cadet 42 inch (1,060 mm) mower deck with two-blades and spring-assisted manual lift
- Front-mount Cub Cadet 46 inch (1,160 mm) blade
- Front-mount Cub Cadet 42 inch (1,060 mm) three-stage snow blower
Cub Cadet XT1 LT42 Specifications
General Specifications | |
Model | Cub Cadet XT1 LT42 |
Length | 1,720 mm (67.7 in) |
Width | – |
Height | 1,070 mm (42.1 in) |
Wheel base | 1,190 mm (46.9 in) |
Weight | 185 kg (407.9 lbs) |
Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station. |
Engine | |
Engine model | Kohler SV541 |
Engine type | Four-stroke, air-cooled, inline |
Cylinders | 1 |
Fuel type | Gasoline |
Displacement | 0.6 L, 596 cm2, (36.4 cu·in) |
Bore and stroke | 94.0 mm X 86.0 mm (3.7 in X 3.39 in) |
Compression ratio | 8.5:1 |
Horsepower | 18.2 PS (13.4 kW; 18 HP) at 3,600 rpm |
Starter | Electric |
Oil type | SAE: 10W-30, 5W-20, 5W-30 API: SG, SH, SJ or higher |
Oil capacity: | 1.2 L (1.27 US. qt, 1.06 Imp. qt.) |
Spark plug | Champion RC12YC (Gap: 0.76 mm (0.030 in) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Disc |
Transmission model | Tuff Torq K46 |
Transmission type | Belt-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 8.8 kmh (5.5 mph) Reverse: 5.0 (3.1 mph) |
Tires | |
Front tires | Lawn/turf: 15×6 |
Rear tires | Lawn/turf: 20×8 |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with manual clutch |
Rear PTO spped | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
What is the width of the XT1 LT42?
Thank you
I’d say about 43.5” at its widest points