The Cub Cadet XT1 LT54 is a 2WD lawn tractor from the XT1 Enduro Series. This tractor has been manufactured by the Cub Cadet (a part of MTD) since 2015. The Cub Cadet XT1 LT54 is equipped with 0.7 L V-Twin gasoline engine and belt-driven hydrostatic transmission with infinite forward and reverse gears.
The Cub Cadet XT1 LT54 lawn tractor used the Kohler KT735. It is a 0.7 L, 725 cm2, (44.2 cu·in) V-twin gasoline engine with 84.0 mm (3.31 in) of cylinder bore and 67.0 mm (2.64 in) of piston stroke. The compression ratio rating is 9.1:1. This engine produced 24.3 PS (17.9 kW; 24.0 HP) at 3,600 rpm of maximum output power.
The Cub Cadet XT1 LT54 is equipped with manual steering, disc brakes, open operator station. and 11.4 liters (3 US gal.; 2.5 Imp. gal) fuel tank.
Following attachments are available for the Cub Cadet XT1 LT54 lawn tractor:
- Mid-mount Cub Cadet 54 inch (1,370 mm) mower deck with three-blades and spring-assisted manual lift:
- XT1 LT54 version used a stamped deck
- XT1 LT54 FAB used fabricated deck
- Front-mount Cub Cadet 46 inch (1,160 mm) blade
- Front-mount Cub Cadet 42 inch (1,060 mm) three-stage snowblower
Cub Cadet XT1 LT54 Specifications
General Specifications | |
Model | Cub Cadet XT1 LT54 |
Length | 1,720 mm (67.7 in) |
Width | |
Height | 1,070 mm (42.1 in) |
Wheel base | 1,190 mm (46.9 in) |
Weight | 231 kg (509.3 lbs) |
Fuel tank capacity | 11.4 liters (3 US gal.; 2.5 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station. |
Engine | |
Engine model | Kohler KT735 |
Engine type | Four-stroke, air-cooled, V-twin |
Cylinders | 2 |
Fuel type | Gasoline |
Displacement | 0.7 L, 725 cm2, (44.2 cu·in) |
Bore and stroke | 84.0 mm X 67.0 mm (3.31 in X 2.64 in) |
Compression ratio | 9.1:1 |
Horsepower | 24.3 PS (17.9 kW; 24 HP) at 3,600 rpm |
Starter | Electric |
Oil type | SAE 10W-30, API: SJ |
Oil capacity: | 1.9 L (2.01 US. qt, 1.67 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Disc |
Transmission model | Tuff Torq K46 |
Transmission type | Belt-driven hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 8.8 kmh (5.5 mph) Reverse: 5.0 (3.1 mph) |
Tires | |
Front tires | Lawn/turf: 15×6 |
Rear tires | Lawn/turf: 20×8 |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with manual clutch |
Rear PTO spped | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment