The David Brown 780 is a 2WD utility tractor manufactured by David Brown in Meltham Mills, Huddersfield, England from 1967 to 1971. The David Brown 780 is equipped with a 2.7 L (164.4 cu·in) three-cylinder diesel engine and a sliding gear with dry disc clutch transmission with 12 forward and 4 reverse gears.
The David Brown 780 utility tractor used the David Brown engine. It is a 2.7 L, 2,694 cm2, (164.4 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 46.6 PS (34.3 kW; 46.0 HP) at 2,000 rpm of output power.
The David Brown 780 is equipped with manual steering, mechanical drum brakes, open operator station, and 36.0 liters (9.5 US gal.; 7.9 Imp. gal) fuel tank.
David Brown 780 Specifications
General Specifications | |
Model | David Brown 780 |
Length | 2,830 mm (111.4 in) |
Width | 1,620 mm (63.8 in) |
Height | 2,090 mm (82.3 in) |
Wheel base | 1,920 mm (75.6 in) |
Ground clearance | 290 mm (11.4 in) |
Weight | 1,575 kg (3,472 lbs) |
Fuel tank capacity | 36.0 liters (9.5 US gal.; 7.9 Imp. gal) |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | David Brown |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.7 L, 2,694 cm2, (164.4 cu·in) |
Bore and stroke | 100.0 mm X 114.0 mm (3.94 in X 4.49 in) |
Compression ratio | 17.0:1 |
Horsepower | 46.6 PS (34.3 kW; 46.0 HP) at 2,000 rpm |
Starter | Electric |
Oil capacity: | 6.2 L (6.6 US. qt, 5.5 Imp. qt.) |
Coolant capacity: | 9.5 L (10 US. qt, 8.4 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Mechanical drum |
Transmission model | |
Transmission type | Sliding gear with dry disc clutch |
Gears | 12 forward and 4 reverse |
Transmission oil capacity | 22.7 L (6 US. gal, 5 Imp. gal.) |
Tires | |
Front tires | Ag: 6.00-16 |
Rear tires | Ag: 12.4/11-28 |
Three-Point Hitch | |
Caterogy | I |
Control type | – |
Lift capacity (at ends) | 1,600 kg (3,530 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Live |
Rear PTO speed | 540/1,000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pressure | 2000 psi (137.9 bar) |
Pump flow | 7.4 gpm (28 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment