The Farmall 504 is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) from 1961 to 1968.
The Farmall 504 is equipped with one of three engines: a 3.1 L (187.5 cu·in) four-cylinder diesel engine, a 2.5 L (152.1 cu·in) four-cylinder gasoline engine, or a 2.5 L (152.1 cu·in) four-cylinder LP gas engine and one of two transmissions: an unsynchronized gear transmission with 5 forward and 1 reverse gear or a two-speed power shift transmission with 10 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- International Harvester D188. It is a 3.1 L, 3,073 cm2, (187.5 cu·in) four-cylinder natural aspirated diesel engine with 94.0 mm (3.7 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 18.7:1.
- International Harvester C153. It is a 2.5 L, 2,492 cm2, (152.1 cu·in) four-cylinder natural aspirated gasoline engine. The cylinder bore is 86.0 mm (3.39 in) and the piston stroke is 108.0 mm (4.25 in).
- International Harvester (LP-gas). It is a 2.5 L, 2,492 cm2, (152.1 cu·in) four-cylinder natural aspirated LP-gas engine. The cylinder bore is 86.0 mm (3.39 in) and the piston stroke is 108.0 mm (4.25 in).
The Farmall 504 is equipped with power steering, differential mechanical disc brakes, and an open operator station.
International Harvester 504 Specifications
General Specifications | |
Model | Farmall 504 |
Length | – |
Width | – |
Height | – |
Wheel base | – |
Ground clearance | – |
Weight | 2,020 kg (4,453 lbs) |
Fuel tank capacity | – |
Battery | 12V |
Cabin type | Open operator station |
Engine | |
Engine model | International Harvester D188 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.1 L, 3,073 cm2, (187.5 cu·in) |
Bore and stroke | 94.0 mm X 112.0 mm (3.7 in X 4.41 in) |
Compression ratio | 18.7:1 |
Horsepower | – |
Starter | Electric |
Engine | |
Engine model | International Harvester C153 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 2.5 L, 2,492 cm2, (152.1 cu·in) |
Bore and stroke | 86.0 mm X 108.0 mm (3.39 in X 4.25 in) |
Horsepower | – |
Starter | Electric |
Engine | |
Engine model | International Harvester |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | LP-gas |
Displacement | 2.5 L, 2,492 cm2, (152.1 cu·in) |
Bore and stroke | 86.0 mm X 108.0 mm (3.39 in X 4.25 in) |
Horsepower | – |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Differential mechanical disc |
Transmission model | – |
Transmission type | Unsynchronized gear |
Gears | 5 forward and 1 reverse |
Transmission model | Torque Amplifier |
Transmission type | Two-speed power shift |
Gears | 10 forward and 2 reverse |
Tires | |
Front tires | Ag: 6.00-16 |
Rear tires | Ag: 13.6-38 |
Three-Point Hitch | |
Category | I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540 rpm |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment