The Farmall Super H is a 2WD row-crop tractor manufactured by Farmall (a part of International Harvester) from 1953 to 1954. The Farmall Super H is equipped with a 2.7 L (164.0 cu·in) four-cylinder gasoline engine and a sliding gear transmission with 5 forward and 1 reverse gears and dry disc clutch.
The Farmall Super H row-crop tractor used the International Harvester C164 engine. It is a 2.7 L, 2,687 cm2, (164.0 cu·in) four-cylinder natural aspirated gasoline engine with 89.0 mm (3.5 in) of the cylinder bore and 108.0 mm (4.25 in) of the piston stroke. The compression ratio rating is 6.1:1. This engine produced 29.4 PS (21.6 kW; 29.0 HP) at 1,650 rpm of PTO output power.
The Farmall Super H is equipped with manual steering, mechanical disc brakes, open operator station and 64.3 liters (17 US gal.; 14.1 Imp. gal) fuel tank.
Farmall Super H Specifications
General Specifications | |
Model | Farmall Super H |
Length | 3,370 mm (132.7 in) |
Width | 1,910 mm (75.2 in) Long axle: 2,540 mm (100 in) |
Height | 2,150 mm (84.6 in) |
Wheel base | 2,260 mm (89 in) |
Weight | 1,760 kg (3,880 lbs) |
Fuel tank capacity | 64.3 liters (17 US gal.; 14.1 Imp. gal) |
Battery | – |
Cabin type | Open operator station |
Engine | |
Engine model | International Harvester C164 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Gasoline |
Displacement | 2.7 L, 2,687 cm2, (164.0 cu·in) |
Bore and stroke | 89.0 mm X 108.0 mm (3.5 in X 4.25 in) |
Compression ratio | 6.1:1 |
Horsepower | 29.4 PS (21.6 kW; 29.0 HP) at 1,650 rpm |
Starter | Electric |
Coolant capacity: | 15.6 L (16.5 US. qt, 13.7 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | Mechanical disc |
Transmission model | – |
Transmission type | Sliding gear with dry disc clutch |
Gears | 5 forward and 1 reverse |
Speed | Forward: 26.1 kmh (16.2 mph) Reverse: 5.2 kmh (3.2 mph) |
Tires | |
Front tires | Ag: 5.50-16 |
Rear tires | Ag: 11-38 |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 540 rpm |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment