The Fiat F140 is a 4WD row-crop tractor from the Winner series. This tractor was manufactured by Fiat from 1993 to 1996. The Fiat F140 is equipped with a 5.9 L (357.7 cu·in) six-cylinder diesel engine and a hi-lo transmission with 24 forward and 12 reverse gears (48 forward and 24 reverse gears with creeper).
The Fiat F140 row-crop tractor used the Iveco 8065.25 engine. It is a 5.9 L, 5,861 cm2, (357.7 cu·in) six-cylinder turbocharged diesel engine with 104.0 mm (4.09 in) of the cylinder bore and 115.0 mm (4.53 in) of the piston stroke. This engine produced 142 PS (104.4 kW; 140.0 HP) at 2,250 rpm of output power.
The Fiat F140 is equipped with hydrostatic power steering, wet disc brakes, cab (standard) and 220.0 liters (58.1 US gal.; 48.4 Imp. gal) fuel tank.
Fiat F140 Specifications
General Specifications | |
Model | Fiat F140 |
Length | 4,650 mm (183.1 in) |
Width | – |
Height | 2,800 mm (110.2 in) |
Wheel base | 2,780 mm (109.4 in) |
Weight | 5,300 kg (11,684 lbs) |
Fuel tank capacity | 220.0 liters (58.1 US gal.; 48.4 Imp. gal) |
Battery | – |
Cabin type | Cab (standard) |
Engine | |
Engine model | Iveco 8065.25 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 5.9 L, 5,861 cm2, (357.7 cu·in) |
Bore and stroke | 104.0 mm X 115.0 mm (4.09 in X 4.53 in) |
Horsepower | 142 PS (104.4 kW; 140.0 HP) at 2,250 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Wet disc |
Transmission model | – |
Transmission type | Hi-Lo with hydraulic cerametallic dry disc clutch |
Gears | 24 forward and 12 reverse |
Tires | |
Front tires | Ag: 16.9-28 Ag: 420/70R28, 480/70R28 |
Rear tires | Ag: 20.8-38 Ag: 520/70R38, 580/70R38 |
Three-Point Hitch | |
Category | III/II |
Control type | Position control and lower-link draft sensing |
Lift capacity | 6,570 kg (14,490 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with electro-hydraulic clutch |
Rear PTO speed | 540/1000 or 540/750/1000 (optional) |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 14.5 gpm (54.9 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment