The Ford 1100 is a two-wheel (2WD) or optional four-wheel (4WD) compact utility tractor from the Hundred compact series, manufactured by Japanese company Shibaura for Ford brand from 1979 to 1982. The Ford 1100 tractor is equipped with two-cylinders Shibaura LEK752C2 diesel engine with 0.7 L, 706 cc (43.1 cu-in) of displacement and gear shift transmission with 10 forward and 2 reverse gears.
The Ford 1100 tractor used a two-cylinder naturally-aspirated liquid-cooled diesel engine Shibaura LEK752C2, with 75.0 mm (2.95 in) of the cylinder bore and 80.0 mm (3.15 in) of the piston stroke. Compression ratio rating is 23.0:1. It produced 13.2 PS (9.7 kW; 13.0 HP) of gross horsepower and 11.2 PS (8.2 kW; 11.0 HP) of PTO shaft horsepower. The engine used dry air cleaner and pre-heating glow plugs.
This utility tractor is equipped with gear shift transmission with 10 forward (1.0-13.9 km/h, 0.6-8.7 mph) and 2 reverse (1.7-7.6 km/h, 1.0-4.7 mph) gears. The tractor used manual steering, differential mechanical drum brakes, and live type hydraulic system.
The 1100 tractor can use the following attachments:
- Mid-mount Ford 915 mower deck with 3-blades (cutting width: 1,520 mm (60 in.)
- Front-mount Ford 715 snow blower with hydraulic lift (clearing width: 1,520 mm (60 in.)
- Front-end loader Ford 768
- Backhoe Ford 757
The Ford 1100 used a rollover protection structure (ROPS) for operators. The tractor has rear PTO shaft with 540 rpm, front PTO was available as an option.
Ford 1100 specifications
General Specifications | |
Model | Ford 1100 |
Length | 2,410 mm (94.9 in.) |
Width | 1,060 mm (42.0 in.) |
Height | 2,000 mm (79.0 in.) with ROPS |
Wheelbase | 1,210 mm (48.0 in.) |
Ground clearance | 240 mm (9.7 in.) |
Weight | 513 kg (1,131 lb.) |
Fuel tank capacity | 14.0 L (3.7 US gal.) |
Battery | 12V 70A |
Engine | |
Engine model | Shibaura LEK752C2 |
Number of Cylinders | 2 |
Firing order | 2-1 |
Fuel | Diesel |
Displacement | 0.7 L, 706 cc (43.1 cu.in.) |
Bore x stroke | 75.0 x 80.0 mm (2.95 x 3.15 in) |
Power output | Gross: 13.2 PS (9.7 kW; 13.0 HP) PTO: 11.2 PS (8.2 kW; 11.0 HP) |
Torque | – |
Starter type | Electric starter |
Oil type | – |
Governed Speeds | Low Idle: 750-850 rpm; High Idle: 2,750-2,850 rpm; (no load) Rated: 2,600 rpm (full load) |
Oil capacity | 3.3 L (3.5 U.S. qt) |
Coolant capacity | 3.0 L (3.2 U.S. qt) |
Injection Timing, B.T.D.C. | 23°-24° |
Valve clearance | Intake: 0.30 mm (0.012 in.) Exhaust: 0.30 mm (0.012 in.) |
Tires size | |
Front tires | Ag (2WD): 4.00-12 Ag (4WD): 5.00-12 Turf / Lawn (2WD): 18×7.0-8 Turf / Lawn (4WD): 23×8.5-12 |
Rear tires | Ag: 7.00-16 Turf: 8.00-16 |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD (opton) |
Steering | Manual |
Transmission type | Gear shift |
Gears | 10 forward and 2 reverse |
Ground speed | Forward: up to 13.9 km/h (8.7 mph) Reverse: up to 7.6 km/h (4.7 mph) |
PTO (Power take-off shaft) | |
PTO Type: | Rear, transmission |
PTO Speed: | 540 rpm |
Hydraulic lift | |
3-point linkage: | Category I |
Control system: | – |
No. of remote valves: | – |
Max lifting capacity (at link end): | 399 kg (881 lb.) |
Hydraulic system | |
Type | Live |
Total flow | – |
Oil capacity (Transmission, Rear Axle and Hydraulic System) | 18.9 L (20.0 US. qt.) |
Front axle differential case | 1.5 L (1.6 U.S. qt.) |
Front axle reduction case (Each) | 0.2 L (0.21 U.S. qt.) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment