Ford 1720

Ford 1720The Ford 1720 is a 2WD or 4WD compact utility tractor from the Twenty Compact series. This tractor was manufactured by Shibaura for Ford in Japan from 1987 to 2000. The Ford 1720 is equipped with a 1.5 L three-cylinder diesel engine and one of two transmissions: gear type transmission with 12 forward and 4 reverse gears or mechanical shuttle transmission with 12 forward and 12 reverse gears.

The Ford 1720 compact utility tractor used the Shibaura N843 engine. It is a 1.5 L, 1,496 cm2, (91.3 cu·in) three-cylinder natural aspirated diesel engine with 84.0 mm (3.31 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 22.5:1. This engine produced 28.2 PS (20.7 kW; 27.8 HP) at 2,500 rpm of net output power.

The Ford 1720 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 32.0 liters (8.5 US gal.; 7 Imp. gal) fuel tank.

Following attachments are available for the Ford 1720 compact utility tractor:

  • Mid-mount Ford 914: 72 in (1,820 mm) mower deck with 3-blade
  • Front-mount Ford 702C: 78 in (1,980 mm) blade
  • Front-mount Ford 715A: 63 in (1,600 mm) snowblower
  • Ford 7108 loader
  • Ford 757B backhoe

Ford 1720 Specifications

General Specifications
ModelFord 1720
Length3,070 mm (120.9 in)
Width1,400 mm (55.1 in)
Height (ROPS)2,180 mm (85.8 in)
Wheel base1,650 mm (65 in)
Weight (shipping) 2WD: 1,130 kg (2,490 lbs)
4WD: 1,220 kg (2,690 lbs)
Fuel tank capacity32.0 liters (8.5 US gal.; 7 Imp. gal)
Battery12V
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelShibaura N843
Engine typeFour-stroke, liquid-cooled, inline
Cylinders3
Fuel typeDiesel
Displacement1.5 L, 1,496 cm2, (91.3 cu·in)
Bore and stroke84.0 mm X 90.0 mm (3.31 in X 3.54 in)
Compression ratio22.5:1
Horsepower28.2 PS (20.7 kW; 27.8 HP) at 2,500 rpm
StarterElectric
Injection timing22-23° BTDC
Injector opening pressure2,150 psi (14,825 kPa)
Oil capacity:4.5 L (4.8 US. qt, 4 Imp. qt.)
Coolant capacity:5.6 L (5.9 US. qt, 4.9 Imp. qt.)
Intake/Exhaust valve clearance0.20 mm (0.008 in)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Power steering system capacity1.8 L (1.9 US qts, 1.6 Imp qts)
Rear axle and transmission27.0 L (7.1 US gal, 5.9 Imp. gal)
Front wheel drive axle5.0 L (5.3 US qt, 4.4 Imp qt)
Transmission model
Transmission typeGear type
Gears12 forward and 4 reverse
Transmission model
Transmission typeMechanical shuttle
Gears12 forward and reverse
Tires
Front tiresAg: 5.00-15 (2WD), 7-14 (4WD)
Rear tiresAg: 11.2-24
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at 610 mm/24 in)790 kg (1,740 lbs)
PTO (Power take-off shaft)
Rear PTO typeTransmission or live (option)
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow7.8 gpm (29.5 lpm)
Steering flow2.8 gpm (10.6 lpm)
Total flow10.6 gpm (40.1 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*