Ford 4000 (1962-1965)

Ford 4000 (1962-1965)The Ford 4000 is a 2WD utility tractor. The first generation of this tractor was manufactured by Ford in Highland Park, Michigan, USA from 1962 to 1965. The Ford 4000 is equipped with a 2.8 L four-cylinder engine and one of four variants of the transmission. The second generation was manufactured from 1965 to 1967 and the third from 1968 to 1975.

The Ford 4000 utility tractor used the Ford engine. It is a 2.8 L, 2,819 cm2, (172.0 cu·in) four-cylinder natural aspirated engine with 99.0 mm (3.9 in) of the cylinder bore and 91.0 mm (3.58 in) of the piston stroke. This engine had variants for diesel, gasoline, and LP-gas fuel. The compression ratio rating is 7.5:1 for gasoline version, 16.8:1 for diesel and 8.65:1 for LP-gas. The gasoline version produced 55.8 PS (41.0 kW; 55.0 HP) at 2,200 rpm of output power.

The Ford 4000 is equipped with manual steering for utility version or power steering for row-crop version, open operator station and 64.3 liters (17 US gal.; 14.1 Imp. gal) fuel tank.

Ford 4000 Specifications

General Specifications
ModelFord 4000
Length
Width
Height
Wheel base2,140 mm (84.3 in)
Weight Utility: 1,435 kg (3,165 lbs)
Utility: 1,590 kg (3,505 lbs)
Fuel tank capacity64.3 liters (17 US gal.; 14.1 Imp. gal)
Battery
Cabin typeOpen operator station
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel, gasoline, LP-gas
Displacement2.8 L, 2,819 cm2, (172 cu·in)
Bore and stroke99.0 mm X 91.0 mm (3.9 in X 3.58 in)
Compression ratio Gasoline: 7.5:1
Diesel: 16.8:1
LP-gas: 8.65:1
Horsepower55.8 PS (41.0 kW; 55 HP) at 2,200 rpm
StarterElectric
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:13.2 L (13.9 US. qt, 11.6 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeUtility: manual, Row-crop: power
Brakes
Transmission model
Transmission typeGear type
Gears4 forward and 1 reverse
Transmission oil capacity6.2 L (1.6 US. gal, 1.4 Imp. gal.)
Transmission modelFord Select-O-Speed
Transmission typeFull power shift
Gears10 forward and 2 reverse
Transmission model
Transmission type
Gears5 forward and 1 reverse
Transmission oil capacity7.6 L (2 US. gal, 1.7 Imp. gal.)
Transmission model
Transmission typeGear type with over / under
Gears12 forward and 3 reverse
Tires
Front tiresAg: 6.00×16
Rear tiresAg: 13.6×28
Three-Point Hitch
CaterogyII/I
Control type
Lift capacity (at ends)1,450 kg (3,195 lbs)
PTO (Power take-off shaft)
Rear PTO typeTranmission, live, independent
Rear PTO speed540, 540/1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Pump flow5.4 gpm (20.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*