Ford 5000 (1965-1967)

Ford 5000 (1965-1967)The Ford 5000 is a 2WD row-crop tractor manufactured by Ford in Highland Park, Michigan, USA from 1965 to 1976. This first generation was manufactured from 1965 to 1967.

The Ford 5000 is equipped with one of two engines: a 3.8 L (233.0 cu·in) four-cylinder gasoline engine or a 3.8 L (233.0 cu·in) four-cylinder diesel engine and one of three transmissions: a sliding gear transmission with 8 forward and 2 reverse gears, a full powershift transmission with 10 forward and 2 reverse gears or a partial power shift transmission with 16 forward and 4 reverse gears.

The tractor could be equipped with the following engines:

  • Ford gasoline. It is a 3.8 L, 3,818 cm2, (233.0 cu·in) four-cylinder natural aspirated gasoline engine with 107.0 mm (4.21 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 8.0:1. This engine produced 70.0 PS (51.5 kW; 69.0 HP) at 2,100 rpm of output power.
  • Ford diesel. It is a 3.8 L, 3,818 cm2, (233.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 107.0 mm (4.21 in) and the piston stroke is 107.0 mm (4.21 in). The compression ratio rating is 16.5:1. This engine produced 70.0 PS (51.5 kW; 69.0 HP) at 2,100 rpm of output power.

The Ford 5000 is equipped with the power assist (Ford 5100 model) or hydrostatic power steering (Ford 5200), differential mechanical wet disc brakes, an open operator station. and 75.7 liters (20 US gal.; 16.7 Imp. gal) fuel tank.

Ford 5000 variants:

  • 5100: general purpose
  • 5200: row-crop

Ford 5000 Specifications

General Specifications
ModelFord 5000
Length General pu: 3,590 mm (141.3 in)
Row-crop: 3,780 mm (148.8 in)
Width1,730 mm (68.1 in)
Height (steering wheel)1,610 mm (63.4 in)
Wheel base General pu: 2,220 mm (87.4 in)
Row-crop: 2,430 mm (95.7 in)
Ground clearance360 mm (14.2 in)
Weight (shipping) General purpose: 2,600 kg (5,732 lbs)
Row-crop: 2,835 kg (6,250 lbs)
Fuel tank capacity75.7 liters (20 US gal.; 16.7 Imp. gal)
Battery12V, 80 Ah (Gas), 128 Ah (Diesel)
Cabin typeOpen operator station.
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline
Displacement3.8 L, 3,818 cm2, (233.0 cu·in)
Bore and stroke107.0 mm X 107.0 mm (4.21 in X 4.21 in)
Compression ratio8.0:1
Horsepower70.0 PS (51.5 kW; 69.1 HP) at 2,100 rpm
StarterElectric
Oil capacity:7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity:14.5 L (15.3 US. qt, 12.8 Imp. qt.)
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.8 L, 3,818 cm2, (233.0 cu·in)
Bore and stroke107.0 mm X 107.0 mm (4.21 in X 4.21 in)
Compression ratio16.5:1
Horsepower70.0 PS (51.5 kW; 69.1 HP) at 2,100 rpm
StarterElectric
Oil capacity:7.6 L (8 US. qt, 6.7 Imp. qt.)
Coolant capacity:14.5 L (15.3 US. qt, 12.8 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typePower assist or hydrostatic power
BrakesDifferential mechanical wet disc
Transmission model
Transmission typeSliding gear
Gears8 forward and 2 reverse
Speed Forward: 27.0 kmh (16.8 mph) Reverse: 13.0 kmh (8.1 mph)
Transmission oil capacity10.2 L (2.7 US. gal, 2.2 Imp. gal.)
Transmission modelSelect-O-Speed
Transmission typeFull power shift
Gears10 forward and 2 reverse
Speed Forward: 26.4 kmh (16.4 mph) Reverse: 7.4 kmh (4.6 mph)
Transmission oil capacity11.2 L (3 US. gal, 2.5 Imp. gal.)
Transmission modelDual Power
Transmission typePartial power shift
Gears16 forward and 4 reverse
Tires
Front tires Ag: 6.00-16, 7.50-16
Rear tires Ag: 12.4-38, 13.6-38, 15.5-38, 16.9-30, 18.4-26
Three-Point Hitch
CategoryII/I
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540 or 540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity32.9 L (8.7 US. gal, 7.2 Imp. gal.)
Pressure2500 psi (172.4 bar)
Pump flow6.0 gpm (22.7 lpm)
Steering flow4.5 gpm (17 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*