The Ford 7600 is a 2WD or 4WD utility tractor manufactured by Ford from 1975 to 1981.
The Ford 7600 is equipped with one of two engines: a 4.2 L (256.0 cu·in) four-cylinder diesel engine or a 4.4 L (268.0 cu·in) four-cylinder diesel engine and one of two transmissions: a two-speed power shift transmission with 16 forward and 4 reverse gears or a gear type transmission with 8 forward and 2 reverse gears.
The tractor could be equipped with the following engines:
- Ford. It is a 4.2 L, 4,195 cm2, (256.0 cu·in) four-cylinder turbocharged diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 107.0 mm (4.21 in) of the piston stroke. The compression ratio rating is 15.6:1. This engine produced 98.1 PS (72.1 kW; 96.7 HP) at 2,100 rpm of output power.
- Ford. It is a 4.4 L, 4,392 cm2, (268.0 cu·in) four-cylinder turbocharged diesel engine. The cylinder bore is 112.0 mm (4.41 in) and the piston stroke is 112.0 mm (4.41 in).
The Ford 7600 is equipped with power steering, differential wet disc brakes, an open operator station or Cab (optional) and 125.0 liters (33 US gal.; 27.5 Imp. gal) fuel tank.
Ford 7600 Specifications
| General Specifications | |
| Model | Ford 7600 |
| Length | 3,690 mm (145.3 in) |
| Width | 1,850 mm (72.8 in) |
| Height (cab) | 2,700 mm (106.3 in) |
| Wheel base | 2,230 mm (87.8 in) |
| Weight (shipping) | 2,530 kg (5,578 lbs) |
| Fuel tank capacity | 125.0 liters (33 US gal.; 27.5 Imp. gal) |
| Battery | 12V, 128Ah |
| Cabin type | Open operator station or Cab (optional) |
| Engine | |
| Engine model | Ford |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.2 L, 4,195 cm2, (256.0 cu·in) |
| Bore and stroke | 112.0 mm X 107.0 mm (4.41 in X 4.21 in) |
| Compression ratio | 15.6:1 |
| Horsepower | 98.1 PS (72.1 kW; 96.7 HP) at 2,100 rpm |
| Torque | 368.8 N·m (37.6 kg·m, 271.8 ft·lb) at 1,600 rpm |
| Starter | Electric |
| Oil capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
| Coolant capacity: | 13.2 L (13.9 US. qt, 11.6 Imp. qt.) |
| Engine | |
| Engine model | Ford |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 4 |
| Fuel type | Diesel |
| Displacement | 4.4 L, 4,392 cm2, (268.0 cu·in) |
| Bore and stroke | 112.0 mm X 112.0 mm (4.41 in X 4.41 in) |
| Horsepower | – |
| Starter | Electric |
| Transmission and chassis | |
| Chassis | 4×2 2WD or 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Differential wet disc |
| Final drive | Outboard planetary |
| Differential lock | Mechanical rear |
| Transmission model | Dual-Power |
| Transmission type | Two-speed power shift with dry disc clutch |
| Gears | 16 forward and 4 reverse |
| Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 12.3 kmh (7.6 mph) |
| Transmission model | – |
| Transmission type | Gaer type with dry disc clutch |
| Gears | 8 forward and 2 reverse |
| Speed | Forward: 29.9 kmh (18.6 mph) Reverse: 14.5 kmh (9 mph) |
| Tires | |
| Front tires | Ag: 7.50-18 |
| Rear tires | Ag: 16.9-30 |
| Three-Point Hitch | |
| Category | II |
| Control type | Load Monitor draft sensing |
| Lift capacity | 2,010 kg (4,430 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540/1000 rpm |
| Hydraulic system | |
| Hydraulic type | – |
| Hydraulic capacity | 2100 L (554.8 US. gal, 461.9 Imp. gal.) |
| Pump flow | 9.7 gpm (36.7 lpm) |
Hi
I have a ford 7600 and just changed a few seals on the hydraulics . I drained the oil but i need help with what type of oil is used for hydraulics and how many liters do we refill with?