Ford 8210

Ford 8210The Ford 8210 is a 2WD or 4WD row-crop tractor manufactured by Ford from 1982 to 1991. The Ford 8210 is equipped with a 6.6 L (401.0 cu·in) six-cylinder diesel engine and a two-speed power shift transmission with 16 forward and 8 reverse gears.

The Ford 8210 row-crop tractor used the Ford engine. It is a 6.6 L, 6,571 cm2, (401.0 cu·in) six-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 16.3:1. This engine produced 116.7 PS (85.8 kW; 115.0 HP) at 2,300 rpm of output power.

The Ford 8210 is equipped with power steering, mechanical wet disc brakes, cab (standard) with air-conditioning, and 178.0 liters (47 US gal.; 39.2 Imp. gal) fuel tank.

Ford 8210 Specifications

General Specifications
ModelFord 8210
Length4,480 mm (176.4 in)
Width
Height (cab)2,890 mm (113.8 in)
Wheel base2,780 mm (109.4 in)
Ground clearance (front axle)490 mm (19.3 in)
Weight 2WD: 3,960 kg (8,730 lbs)
4WD: 4,250 kg (9,370 lbs)
Fuel tank capacity178.0 liters (47 US gal.; 39.2 Imp. gal)
Battery12V, 128Ah
Cabin typeCab (standard) with air-conditioning
Engine
Engine modelFord
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement6.6 L, 6,571 cm2, (401.0 cu·in)
Bore and stroke112.0 mm X 112.0 mm (4.41 in X 4.41 in)
Compression ratio16.3:1
Horsepower116.7 PS (85.8 kW; 115.0 HP) at 2,300 rpm
StarterElectric
Oil capacity:18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity:21.3 L (22.5 US. qt, 18.7 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesMechanical wet disc
Differential lockMechanical rear
Transmission modelDual Power
Transmission typeTwo-speed power shift with dry disc clutch
Gears16 forward and 8 reverse
Speed Forward: 27.3 kmh (17 mph) Reverse: 10.0 kmh (6.2 mph)
Transmission oil capacity56.8 L (15 US. gal, 12.5 Imp. gal.)
Tires
Front tires Ag: 14.9-24, 14.9-28
Rear tires Ag: 18.4-34, 18.4-38, 16.9-38
Three-Point Hitch
CategoryII
Control typePosition control and top-link draft sensing
Lift capacity (at 610 mm/ 24 in)2,010 kg (4,430 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeOpen center
Valves2 to 4
Pump flow18.2 gpm (68.9 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*