The Ford 8600 is a 2WD row-crop tractor manufactured by Ford from 1972 to 1976. The Ford 8600 is equipped with a 6.6 L (401.0 cu·in) six-cylinder diesel engine and one of two transmissions: a gear type transmission with 8 forward and 2 reverse gears or a partial power shift transmission with 16 forward and 4 reverse gears.
The Ford 8600 row-crop tractor used the Ford engine. It is a 6.6 L, 6,571 cm2, (401.0 cu·in) six-cylinder natural aspirated diesel engine with 112.0 mm (4.41 in) of the cylinder bore and 112.0 mm (4.41 in) of the piston stroke. The compression ratio rating is 16.5:1.
The Ford 8600 is equipped with hydrostatic power steering, differential hydraulic wet disc brakes, open operator station or Cab (optional) and 162.8 liters (43 US gal.; 35.8 Imp. gal) fuel tank.
Ford 8600 Specifications
General Specifications | |
Model | Ford 8600 |
Length | Row crop: 3,930 mm (154.7 in) All purpose: 3,760 mm (148 in) |
Width | 2,150 mm (84.6 in) |
Height (hood) | Row-crop: 1,850 mm (72.8 in) All purpose: 1,870 mm (73.6 in) |
Wheel base | Row-crop: 2,740 mm (107.9 in) All purpose: 2,320 mm (91.3 in) |
Ground clearance (front axle) | 600 mm (23.6 in) All purpose: |
Weight | Row-crop: 4,090 kg (9,017 lbs) All purpose: 3,643 kg (8,031 lbs) |
Fuel tank capacity | 162.8 liters (43 US gal.; 35.8 Imp. gal) |
Battery | 12V, 128Ah |
Cabin type | Open operator station or Cab (optional) |
Engine | |
Engine model | Ford |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 6.6 L, 6,571 cm2, (401.0 cu·in) |
Bore and stroke | 112.0 mm X 112.0 mm (4.41 in X 4.41 in) |
Compression ratio | 16.5:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 11.4 L (12 US. qt, 10 Imp. qt.) |
Coolant capacity: | ROPS: 17.0 L (18.0 US. qt, 15.0 Imp. qt.) Cab: 18.5 L (19.5 US. qt, 16.3 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Differential hydraulic wet disc |
Differential lock | Foot pedal |
Transmission model | – |
Transmission type | Gear type |
Gears | 8 forward and 2 reverse |
Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 12.4 kmh (7.7 mph) |
Transmission oil capacity | 60.6 L (16 US. gal, 13.3 Imp. gal.) |
Transmission model | Dual Power |
Transmission type | Partial power shift |
Gears | 16 forward and 4 reverse |
Speed | Forward: 28.3 kmh (17.6 mph) Reverse: 12.4 kmh (7.7 mph) |
Transmission oil capacity | 65.3 L (17.3 US. gal, 14.4 Imp. gal.) |
Tires | |
Front tires | Ag: 7.50-18 (all purpose), 7.50-16 (row-crop) |
Rear tires | Ag: 18.4-34 (all purpose), 16.9-34 (row-crop) |
Three-Point Hitch | |
Category | II |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 540/1000 rpm |
Hydraulic system | |
Hydraulic type | – |
Hydraulic capacity | 60.6 L (16 US. gal, 13.3 Imp. gal.) Dual Power: 65.3 L (17.3 US. gal, 14.4 Imp. gal.) |
Pressure | 2500 psi (172.4 bar) |
Pump flow | 12.0 gpm (45.4 lpm) |
Steering flow | 4.2 gpm (15.9 lpm) |
Total flow | 16.2 gpm (61.3 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment