The Honda H5516D is a 2WD lawn tractor manufactured by Honda Motor Compamy. The Honda H5516D is equipped with a 0.7 L (41.3 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.
The Honda H5516D lawn tractor used the Shibaura E673 engine. It is a 0.7 L, 676 cm2, (41.3 cu·in) three-cylinder natural aspirated diesel engine with 67.0 mm (2.64 in) of the cylinder bore and 64.0 mm (2.52 in) of the piston stroke. The compression ratio rating is 23.5:1. This engine produced 16.2 PS (11.9 kW; 16.0 HP) at 3,200 rpm of output power.
The Honda H5516D is equipped with manual or power steering, disc brakes, an Open operator station, and 16.0 liters (4.2 US gal.; 3.5 Imp. gal) fuel tank.
Honda H5516D Specifications
General Specifications | |
Model | Honda H5516D |
Length | 1,890 mm (74.4 in) |
Width | 990 mm (39 in) |
Height | 1,210 mm (47.6 in) |
Wheel base | 1,270 mm (50 in) |
Ground clearance | 160 mm (6.3 in) |
Weight | 382 kg (842 lbs) |
Fuel tank capacity | 16.0 liters (4.2 US gal.; 3.5 Imp. gal) |
Battery | 12V, CCA 332A |
Cabin type | Open operator station |
Engine | |
Engine model | Shibaura E673 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 0.7 L, 676 cm2, (41.3 cu·in) |
Bore and stroke | 67.0 mm X 64.0 mm (2.64 in X 2.52 in) |
Compression ratio | 23.5:1 |
Horsepower | 16.2 PS (11.9 kW; 16 HP) at 3,200 rpm |
Starter | Electric |
Oil type | SAE 10W-30, 10W-40 |
Oil capacity: | 3.0 L (3.2 US. qt, 2.6 Imp. qt.) |
Coolant capacity: | 3.3 L (3.5 US. qt, 2.9 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual or power |
Brakes | Disc |
Transmission model | – |
Transmission type | Hydrostatic |
Gears | Infinite forward and reverse |
Speed | Forward: 13.0 kmh (8.1 mph) Reverse: 3.0 (1.9 mph) |
Transmission oil capacity | 8.6 L (2.3 US. gal, 1.9 Imp. gal.) |
Tires | |
Front tires | Lawn/turf: 16×6.5-8 |
Rear tires | Ag: 20×10-12 |
Hydraulic system | |
Hydraulic type | Gear pump |
Pump flow | 0.4 gpm (1.5 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment