The International Harvester 1466 is a 2WD/4WD row-crop tractor from the 66 series. This tractor was manufactured by International Harvester from 1971 to 1976. The IH 1466 is equipped with a 7.1 L six-cylinder turbocharged diesel engine and one of two transmissions: gear type transmission with 8 forward and 4 reverse gears or torque amplifier transmission with 16 forward and 8 reverse gears.
The IH 1466 row-crop tractor used the International Harvester DT-436 engine. It is a 7.1 L, 7,144 cm2, (436.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. This engine produced 149.1 PS (109.6 kW; 147.0 HP) of output power.
The International Harvester 1466 is equipped with hydrostatic power steering, independent hydrostatic dry disc brakes, open operator station or cab with heat and A/C (optional) and 159.0 liters (42 US gal.; 35 Imp. gal) fuel tank.
International Harvester 1466 Specifications
General Specifications | |
Model | International Harvester 1466 |
Length | 4,260 mm (167.7 in) |
Width | 2,480 mm (97.6 in) |
Height | 2,810 mm (110.6 in) |
Wheel base | 2,660 mm (104.7 in) |
Weight | 7,556 kg (16,658 lbs) |
Fuel tank capacity | 159.0 liters (42 US gal.; 35 Imp. gal) |
Battery | Two 6V, 172Ah |
Cabin type | Open operator station or Cab with heat and A/C (optional) |
Engine | |
Engine model | International Harvester DT-436 |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 7.1 L, 7,144 cm2, (436 cu·in) |
Bore and stroke | 109.0 mm X 127.0 mm (4.29 in X 5 in) |
Horsepower | 149.1 PS (109.6 kW; 147.0 HP) |
Starter | Electric |
Oil capacity: | 17.0 L (18 US. qt, 15 Imp. qt.) |
Coolant capacity: | 25.6 L (27.1 US. qt, 22.5 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Hydrostatic power |
Brakes | Independent hydrostatic dry disc |
Transmission model | – |
Transmission type | Gear type |
Gears | 8 forward and 4 reverse |
Speed | Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 (10 mph) |
Transmission oil capacity | 83.3 L (22 US. gal, 18.3 Imp. gal.) |
Transmission model | – |
Transmission type | Torque amplifier |
Gears | 16 forward and 8 reverse |
Speed | Forward: 32.6 kmh (20.3 mph) Reverse: 16.1 (10 mph) |
Transmission oil capacity | 83.3 L (22 US. gal, 18.3 Imp. gal.) |
Tires | |
Front tires | Ag: 11L-15 |
Rear tires | Ag: 18.4-38 |
Three-Point Hitch | |
Caterogy | III/II |
Control type | – |
Lift capacity (at ends) | 2,540 kg (5,600 lbs) |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO spped | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 83.3 L (88.02 US. qt, 73.29 Imp. qt.) |
Pressure | 2,000 psi (138 bar) |
Valves | 1 |
Pump flow | 12.0 gpm (45.4 lpm) |
Steering flow | 9.0 gpm (34.1 lpm) |
Total flow | 23.0 gpm (87.1 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment