International Harvester 1586

International Harvester 1586The International Harvester 1586 is a 2WD or 4WD row-crop tractor from the 86 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1976 to 1981. The IH 1586 is equipped with a 7.1 L (436.0 cu·in) six-cylinder diesel engine and a partial power shift transmission with 12 forward and 6 reverse gears.

The International Harvester 1586 row-crop tractor used the International Harvester DT436 engine. It is a 7.1 L, 7,145 cm2, (436.0 cu·in) six-cylinder turbocharged diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke.This engine produced 162.2 PS (119.3 kW; 160.0 HP) at 2,500 rpm of PTO output power.

The International Harvester 1586 is equipped with power assist steering, hydraulic disc brakes, the cab and 238.5 liters (63 US gal.; 52.5 Imp. gal) fuel tank.

International Harvester 1586 Specifications

General Specifications
ModelInternational Harvester 1586
Length4,290 mm (168.9 in)
Width2,840 mm (111.8 in)
Height2,940 mm (115.7 in)
Wheel base2,660 mm (104.7 in)
Ground clearance350 mm (13.8 in)
Weight6,860 kg (15,124 lbs)
Fuel tank capacity Main: 238.5 liters (63.0 US gal.; 52.5 Imp. gal)
Auxiliary: 83.3 liters (22.0 US gal, 18.3 Imp. gal)
BatteryTwo 12V CCA 480
Cabin typeCab (standard)
Engine
Engine modelInternational Harvester DT436
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement7.1 L, 7,145 cm2, (436.0 cu·in)
Bore and stroke109.0 mm X 127.0 mm (4.29 in X 5 in)
Horsepower162.2 PS (119.3 kW; 160.0 HP) at 2,500 rpm
StarterElectric
Oil capacity:18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity:25.6 L (27.1 US. qt, 22.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower assist
BrakesHydraulic disc
Transmission modelTorque Amplifier
Transmission typePartial power shift
Gears12 forward and 6 reverse
Speed Forward: 27.4 kmh (17 mph) Reverse: 15.1 (9.4 mph)
Transmission oil capacity102.2 L (27 US. gal, 22.5 Imp. gal.)
Tires
Front tiresAg: 11.00-16
Rear tiresAg: 20.8-38
Three-Point Hitch
CaterogyIII
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity102.2 L (107.99 US. qt, 89.92 Imp. qt.)
Valves2
Pump flow12.0 gpm (45.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*