International Harvester 5488

International Harvester 5488The International Harvester 5488 is a 2WD or 4WD row-crop tractor from the 50 series. This tractor was manufactured by International Harvester in Rock Island, Illinois, USA from 1981 to 1985. The International Harvester 5488 is equipped with a 7.6 L (466.0 cu·in) six-cylinder diesel engine and a transmission with 18 forward and 6 reverse gears.

The International 5488 row-crop tractor used the International Harvester DTI-466B engine. It is a 7.6 L, 7,636 cm2, (466.0 cu·in) six-cylinder turbocharged intercooled diesel engine with 109.0 mm (4.29 in) of the cylinder bore and 136.0 mm (5.35 in) of the piston stroke. This engine produced 187.7 PS (138.0 kW; 185.0 HP) at 2,400 rpm of PTO output power.

The IH 5488 is equipped with hydrostatic power steering, wet disc brakes, cab standard with heat and A/C, and 329.3 liters (87 US gal.; 72.4 Imp. gal) fuel tank.

International Harvester 5488 Specifications

General Specifications
ModelInternational Harvester 5488
Length4,990 mm (196.5 in)
Width2,890 mm (113.8 in)
Height2,940 mm (115.7 in)
Wheel base2,830 mm (111.4 in)
Ground clearance460 mm (18.1 in)
Weight (operating)7,820 kg (17,240 lbs)
Fuel tank capacity329.3 liters (87 US gal.; 72.4 Imp. gal)
Battery12V
Cabin typeCab standard with heat and A/C
Engine
Engine modelInternational Harvester DTI-466B
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement7.6 L, 7,636 cm2, (466.0 cu·in)
Bore and stroke109.0 mm X 136.0 mm (4.29 in X 5.35 in)
Horsepower187.7 PS (138.0 kW; 185.0 HP) at 2,400 rpm
StarterElectric
Oil capacity:18.9 L (20 US. qt, 16.6 Imp. qt.)
Coolant capacity:31.2 L (33 US. qt, 27.5 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typeHydrostatic power
BrakesWet disc
Transmission modelSynchro Tri-Six (STS)
Transmission type
Gears18 forward and 6 reverse
Speed Forward: 29.8 kmh (18.5 mph) Reverse: 10.0 (6.2 mph)
Transmission oil capacity164.7 L (43.5 US. gal, 36.2 Imp. gal.)
Tires
Front tires Ag: 14L-16.1
Rear tires Ag: 20.8-38
Three-Point Hitch
CategoryIII
Control type
Lift capacity (at ends)3,663 kg (8,080 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed1,000 rpm
Hydraulic system
Hydraulic typeClosed center
Hydraulic capacity164.6 L (43.5 US. gal, 36.2 Imp. gal.)
Valves2
Pump flow 25.0 gpm (94.6 lpm)
40.0 gpm (151.4 lpm)
Steering flow12.0 gpm (45.4 lpm)
Total flow 67.0 gpm (253.6 lpm)
82.0 gpm (310.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*