International Harvester B-414

International Harvester B-414The International Harvester B-414 is a 2WD utility tractor manufactured by International Harvester in Bradford, England from 1961 to 1966.

The International B414 is equipped with one of two engines: a 2.3 L (143.0 cu·in) four-cylinder gasoline engine or a 2.5 L (154.0 cu·in) four-cylinder diesel engine and one of two transmissions: a sliding gear with dry disc clutch transmission with 8 forward and 2 reverse gears or transmission with 8 forward and 8 reverse gears.

The tractor could be equipped with the following engines:

  • International Harvester BC-144. It is a 2.3 L, 2,343 cm2, (143.0 cu·in) four-cylinder natural aspirated gasoline engine with 86.0 mm (3.39 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 6.3:1. This engine produced 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm of output power and 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,300 rpm of torque.
  • International Harvester BD-154. It is a 2.5 L, 2,524 cm2, (154.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 89.0 mm (3.5 in) and the piston stroke is 102.0 mm (4.02 in). The compression ratio rating is 22.6:1. This engine produced 44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm of output power and 157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,400 rpm of torque.

The IH B-414 is equipped with manual or power (option) steering, independent mechanical disc brakes, an open operator station, and 48.1 liters (12.7 US gal.; 10.6 Imp. gal) fuel tank.

Following attachments are available for the IH B414 utility tractor:

  • International 1501 loader
  • International 2001 loader

International Harvester B-414 Specifications

General Specifications
ModelInternational Harvester B-414
Length2,970 mm (116.9 in)
Width2,280 mm (89.8 in)
Height (steering wheel)1,530 mm (60.2 in)
Wheel base1,940 mm (76.4 in)
Ground clearance Front axle: 470 mm (18.5 in)
Rear axle: 430 mm (16.9 in)
Weight (operating)1,840 kg (4,057 lbs)
Fuel tank capacity48.1 liters (12.7 US gal.; 10.6 Imp. gal)
BatteryGas: 12V, Diesel: two 6V
Cabin typeOpen operator station
Engine
Engine modelInternational Harvester BC-144
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline
Displacement2.3 L, 2,343 cm2, (143.0 cu·in)
Bore and stroke86.0 mm X 102.0 mm (3.39 in X 4.02 in)
Compression ratio6.3:1
Horsepower44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm
Torque157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,300 rpm
StarterElectric
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:9.5 L (10 US. qt, 8.4 Imp. qt.)
Engine
Engine modelInternational Harvester BD-154
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.5 L, 2,524 cm2, (154.0 cu·in)
Bore and stroke89.0 mm X 102.0 mm (3.5 in X 4.02 in)
Compression ratio22.6:1
Horsepower44.1 PS (32.4 kW; 43.4 HP) at 2,000 rpm
Torque157.3 N·m (16 kg·m, 115.9 ft·lb) at 1,400 rpm
StarterElectric
Oil capacity:4.7 L (5 US. qt, 4.1 Imp. qt.)
Coolant capacity:9.5 L (10 US. qt, 8.4 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeManual or power (option)
BrakesIndependent mechanical disc
Transmission model
Transmission typeSliding gear with dry disc clutch
Gears8 forward and 2 reverse
Speed Forward: 25.0 kmh (15.5 mph) Reverse: 10.4 (6.5 mph)
Transmission oil capacity18.9 L (5 US. gal, 4.2 Imp. gal.)
Transmission modelReverser
Transmission type
Gears8 forward and 8 reverse
Speed Forward: 25.0 kmh (15.5 mph) Reverse: 31.6 (19.6 mph)
Transmission oil capacity18.9 L (5 US. gal, 4.2 Imp. gal.)
Tires
Front tires Ag: 6.00-16
Rear tires Ag: 13.6-28
Three-Point Hitch
CategoryI
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeLive
Rear PTO speed540 rpm
Hydraulic system
Hydraulic type
Hydraulic capacity11.4 L (3 US. gal, 2.5 Imp. gal.)
Total flow 6.9 gpm (26.1 lpm)
9.1 gpm (34.4 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*