The J.I. Case 1190 is a 2WD utility tractor from the 90 series. This tractor was manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983. The J.I. Case 1190 is equipped with a 2.7 L (164.0 cu·in) three-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears and dry disc clutch.
The J.I. Case 1190 utility tractor used the J.I. Case engine. It is a 2.7 L, 2,687 cm2, (164.0 cu·in) three-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 114.0 mm (4.49 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm of PTO output power.
The J.I. Case 1190 is equipped with hydrostatic power steering, mechanical drum brakes, two-post ROPS, and 60.6 liters (16 US gal.; 13.3 Imp. gal) fuel tank.
J.I. Case 1190 Specifications
General Specifications | |
Model | J.I. Case 1190 |
Length | 3,070 mm (120.9 in) |
Width | – |
Height (exhaust) | 2,130 mm (83.9 in) |
Wheel base | 1,950 mm (76.8 in) |
Ground clearance (front axle) | 400 mm (15.7 in) |
Weight (shipping) | 2,095 kg (4,619 lbs) |
Fuel tank capacity | 60.6 liters (16 US gal.; 13.3 Imp. gal) |
Battery | 12V, 26Ah |
Cabin type | Two-post ROPS |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.7 L, 2,687 cm2, (164.0 cu·in) |
Bore and stroke | 100.0 mm X 114.0 mm (3.94 in X 4.49 in) |
Compression ratio | 17.0:1 |
Horsepower | 43.7 PS (32.1 kW; 43.0 HP) at 2,200 rpm |
Starter | Electric |
Oil capacity: | 6.2 L (6.6 US. qt, 5.5 Imp. qt.) |
Coolant capacity: | 8.5 L (9 US. qt, 7.5 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Hydrostatic power |
Brakes | Mechanical drum |
Transmission model | – |
Transmission type | Synchromesh with dry disc clutch |
Gears | 12 forward and 4 reverse |
Speed | Forward: 25.9 kmh (16.1 mph) Reverse: 14.9 (9.3 mph) |
Tires | |
Front tires | Ag: 6.00×16 |
Rear tires | Ag: 13.6×28 |
Three-Point Hitch | |
Category | I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 27.3 L (7.2 US. gal, 6 Imp. gal.) |
Valves | 1 or 2 |
Pump flow | 7.25 gpm (27.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment