The J.I. Case 1290 is a 2WD utility tractor manufactured by J.I. Case in Meltham Mills, Huddersfield, England from 1980 to 1983.
The J.I. Case 1290 is equipped with one of two engines: a 3.2 L (195.0 cu·in) four-cylinder diesel engine or a 3.6 L (219.0 cu·in) four-cylinder diesel engine and a synchromesh transmission with 12 forward and 4 reverse gears and dry disc clutch.
The tractor could be equipped with the following engines:
- J.I. Case. It is a 3.2 L, 3,195 cm2, (195.0 cu·in) four-cylinder natural aspirated diesel engine with 100.0 mm (3.94 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 17.0:1.
- J.I. Case. It is a 3.6 L, 3,589 cm2, (219.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 100.0 mm (3.94 in) and the piston stroke is 114.0 mm (4.49 in).
The J.I. Case 1290 is equipped with power steering, mechanical drum brakes, two-post ROPS, and 72.0 liters (19 US gal.; 15.8 Imp. gal) fuel tank.
J.I. Case 1290 Specifications
General Specifications | |
Model | J.I. Case 1290 |
Length | 3,420 mm (134.6 in) |
Width | – |
Height | 2,230 mm (87.8 in) |
Wheel base | 2,100 mm (82.7 in) |
Ground clearance (front axle) | 2WD: 530 mm (20.9 in) 4WD: 330 mm (13 in) |
Weight (shipping) | 2,445 kg (5,390 lbs) |
Fuel tank capacity | 72.0 liters (19 US gal.; 15.8 Imp. gal) |
Battery | 12V |
Cabin type | Two-post ROPS |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.2 L, 3,195 cm2, (195.0 cu·in) |
Bore and stroke | 100.0 mm X 102.0 mm (3.94 in X 4.02 in) |
Compression ratio | 17.0:1 |
Horsepower | – |
Starter | Electric |
Oil capacity: | 7.5 L (7.9 US. qt, 6.6 Imp. qt.) |
Coolant capacity: | 14.0 L (14.8 US. qt, 12.3 Imp. qt.) |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.6 L, 3,589 cm2, (219.0 cu·in) |
Bore and stroke | 100.0 mm X 114.0 mm (3.94 in X 4.49 in) |
Horsepower | – |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD or 4×4 MFWD 4WD |
Steering type | Power |
Brakes | Mechanical drum |
Transmission model | – |
Transmission type | Synchromesh with dry disc clutch |
Gears | 12 forward and 4 reverse |
Speed | Forward: 24.1 kmh (15 mph) Reverse: 13.8 (8.6 mph) |
Transmission oil capacity | 27.0 L (7.1 US. gal, 5.9 Imp. gal.) |
Tires | |
Front tires | Ag: 7.50-16 |
Rear tires | Ag: 16.9-30 |
Three-Point Hitch | |
Category | II/I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Transmission or independent |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Hydraulic capacity | 26.9 L (7.1 US. gal, 5.9 Imp. gal.) |
Valves | 1 or 2 |
Pump flow | 7.25 gpm (27.4 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment