The J.I. Case 1470 Traction King is a 4WD four-wheel drive tractor, manufactured by J.I. Case from 1969 to 1972. The J.I. Case 1470 Traction King is equipped with a 8.3 L (504.1 cu·in) six-cylinder diesel engine and a transmission with 8 forward and 4 reverse gears.
The J.I. Case 1470TK four-wheel-drive tractor used the J.I. Case engine. It is a 8.3 L, 8,260 cm2, (504.1 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 127.8 PS (94.0 kW; 126.0 HP) at 2,000 rpm of output power.
The J.I. Case 1470 TK is equipped with four-wheel hydraulic power steering, hydraulic disc brakes, an open operator station or cab (optional), and 265 liters (70 US gal.; 58.3 Imp. gal) fuel tank.
J.I. Case 1470 Traction King Specifications
General Specifications | |
Model | J.I. Case 1470 Traction King |
Length | – |
Width | – |
Height | – |
Wheel base | 2,590 mm (102 in) |
Ground clearance | – |
Weight (operating) | 7,850 kg (17,306 lbs) |
Fuel tank capacity | 265 liters (70 US gal.; 58.3 Imp. gal) |
Battery | – |
Cabin type | Open operator station or Cab (optional) |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 8.3 L, 8,260 cm2, (504.1 cu·in) |
Bore and stroke | 117.0 mm X 127.0 mm (4.61 in X 5 in) |
Compression ratio | 16.5:1 |
Horsepower (drawbar) | 127.8 PS (94.0 kW; 126.0 HP) at 2,000 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×4 4WD |
Steering type | Four-wheel hydraulic power steering |
Brakes | Hydraulic disc |
Transmission model | – |
Transmission type | – |
Gears | 8 forward and 4 reverse |
Speed | Forward: 22.4 kmh (13.9 mph) Reverse: 20.8 kmh (12.9 mph) |
Tires | |
Front tires | Ag: 28.1-26, 18.4×30 |
Rear tires | Ag: 28.1-26, 18.4×30 |
Three-Point Hitch | |
Category | III |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | – |
Rear PTO speed | 1,000 rpm |
Hydraulic system | |
Hydraulic type | – |
Pump flow | 15.5 gpm (58.7 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment