J.I. Case 2096

J.I. Case 2096The J.I. Case 2096 is a 2WD or 4WD row-crop tractor from the 96 series. This tractor was manufactured by J.I. Case in Racine, Wisconsin, USA from 1984 to 1985. The J.I. Case 2096 is equipped with a 5.9 L (359.0 cu·in) six-cylinder diesel engine and a three-speed power shift transmission with 12 forward and 3 reverse gears.

The Case 2096 row-crop tractor used the CDC engine. It is a 5.9 L, 5,883 cm2, (359.0 cu·in) six-cylinder turbocharged diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 120.0 mm (4.72 in) of the piston stroke. The compression ratio rating is 16.5:1. This engine produced 117.6 PS (86.5 kW; 116.0 HP) at 2,100 rpm of PTO output power.

The J.I. Case 2096 is equipped with power steering, differential hydraulic wet discs brakes, two-post folding ROPS or cab (optional), and 246.0 liters (65 US gal.; 54.1 Imp. gal) fuel tank.

J.I. Case 2096 Specifications

General Specifications
ModelJ.I. Case 2096
Length4,340 mm (170.9 in)
Width
Height
Wheel base2,740 mm (107.9 in)
Ground clearance400 mm (15.7 in)
Weight (shipping) 2WD: 5,390 kg (11,883 lbs)
4WD: 5,930 kg (13,073 lbs)
Fuel tank capacity246.0 liters (65 US gal.; 54.1 Imp. gal)
Battery12V
Cabin typeTwo-post folding ROPS or Cab (optional)
Engine
Engine modelCDC
Engine typeFour-stroke, liquid-cooled, inline
Cylinders6
Fuel typeDiesel
Displacement5.9 L, 5,883 cm2, (359.0 cu·in)
Bore and stroke102.0 mm X 120.0 mm (4.02 in X 4.72 in)
Compression ratio16.5:1
Horsepower117.6 PS (86.5 kW; 116.0 HP) at 2,100 rpm
StarterElectric
Oil capacity:15.1 L (16 US. qt, 13.3 Imp. qt.)
Coolant capacity:20.8 L (22 US. qt, 18.3 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesDifferential hydraulic wet discs
Differential lockElectric rear
Transmission model
Transmission typeThree-speed power shift
Gears12 forward and 3 reverse
Speed Forward: 29.1 kmh (18.1 mph) Reverse: 13.0 (8.1 mph)
Transmission oil capacity94.6 L (25 US. gal, 20.8 Imp. gal.)
Tires
Front tires Ag: 11.00-16 (2WD), 16.9-26 (4WD)
Rear tires Ag: 18.4-38
Three-Point Hitch
CategoryII
Control type
Lift capacity (at 610 mm/24 in)3742 kg (8251 lbs)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO speed540/1000 rpm
Hydraulic system
Hydraulic typeClosed center
Hydraulic capacity94.6 L (25 US. gal, 20.8 Imp. gal.)
Pressure2250 psi (155.1 bar)
Valves2
Pump flow23.0 gpm (87.1 lpm)
Steering flow8.0 gpm (30.3 lpm)
Total flow31.0 gpm (117.3 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*