The J.I. Case 2670 is a 4WD four-wheel drive tractor manufactured by J.I. Case in Racine, Wisconsin, USA from 1974 to 1979. The J.I. Case 2670 is equipped with an 8.3 L (504.0 cu·in) six-cylinder diesel engine and a partial powershift transmission with 12 forward and 4 reverse gears.
The Case 2670 four-wheel drive tractor used the J.I. Case engine. It is a 8.3 L, 8,259 cm2, (504.0 cu·in) six-cylinder turbocharged diesel engine with 117.0 mm (4.61 in) of the cylinder bore and 127.0 mm (5 in) of the piston stroke. The compression ratio rating is 15.8:1. This engine produced 222.1 PS (163.3 kW; 219.0 HP) at 2,200 rpm of PTO output power.
The J.I. Case 2670 is equipped with hydrostatic front and hydraulic-assist rear steering, hydraulic wet disc brakes, cab (standard), and 416.4 liters (110 US gal.; 91.6 Imp. gal) fuel tank.
J.I. Case 2670 Specifications
General Specifications | |
Model | J.I. Case 2670 |
Length | – |
Width | – |
Height | – |
Wheel base | 2,590 mm (102 in) |
Weight (operating) | 9,440 kg (20,812 lbs) |
Fuel tank capacity | 416.4 liters (110 US gal.; 91.6 Imp. gal) |
Battery | Two 12V |
Cabin type | Cab (standard) |
Engine | |
Engine model | J.I. Case |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 6 |
Fuel type | Diesel |
Displacement | 8.3 L, 8,259 cm2, (504.0 cu·in) |
Bore and stroke | 117.0 mm X 127.0 mm (4.61 in X 5 in) |
Compression ratio | 15.8:1 |
Horsepower | 222.1 PS (163.3 kW; 219.0 HP) at 2,200 rpm |
Starter | Electric |
Coolant capacity: | 45.4 L (48 US. qt, 39.9 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×4 4WD |
Steering type | Hydrostatic front and hydraulic-assist rear |
Brakes | Hydraulic wet disc |
Transmission model | Range Power Shift |
Transmission type | Partial powershift |
Gears | 12 forward and 4 reverse |
Speed | Forward: 23.3 kmh (14.5 mph) Reverse: 8.2 (5.1 mph) |
Tires | |
Front tires | Ag: 18.4-34 |
Rear tires | Ag: 18.4-34 |
PTO (Power take-off shaft) | |
Rear PTO type | Independent |
Rear PTO speed | 1,000 rpm |
Hydraulic system | |
Hydraulic type | Open center |
Valves | 2 |
Pump flow | 17.0 gpm (64.4 lpm) |
Total flow | 39.0 gpm (147.6 lpm) |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment