J.I. Case 310E

J.I. Case 310EThe J.I. Case 310E is an agricultural crawler manufactured by J.I. Case from 1961 to 1964.

The J.I. Case 310E crawler / dozer is equipped with one of two engines: a 3.1 L (188.4 cu·in) four-cylinder diesel engine or a 2.4 L (148.0 cu·in) four-cylinder diesel engine and a gear type transmission with 3 forward and 1 reverse gears dry disc clutch.

The tractor could be equipped with the following engines:

  • J.I. Case G-188D. It is a 3.1 L, 3,087 cm2, (188.4 cu·in) four-cylinder natural aspirated diesel engine with 97.0 mm (3.82 in) of the cylinder bore and 105.0 mm (4.13 in) of the piston stroke. The compression ratio rating is 17.5:1. This engine produced 40.5 PS (29.8 kW; 40.0 HP) at 1,850 rpm of output power.
  • J.I. Case G-148B. It is a 2.4 L, 2,425 cm2, (148.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 86.0 mm (3.39 in) and the piston stroke is 105.0 mm (4.13 in). This engine produced 42.6 PS (31.3 kW; 42.0 HP) at 1,850 rpm of output power.

The J.I. Case 310E is equipped with contracting band brakes, Open operator station and 64.3 liters (17 US gal.; 14.1 Imp. gal) fuel tank.

J.I. Case 310E Specifications

General Specifications
ModelJ.I. Case 310E
Length2,560 mm (100.8 in)
Width1,570 mm (61.8 in)
Height (exhaust)1,750 mm (68.9 in)
Wheel base1,440 mm (56.7 in)
Ground clearance380 mm (15 in)
Weight (operating)3,420 kg (7,540 lbs)
Fuel tank capacity64.3 liters (17 US gal.; 14.1 Imp. gal)
Battery
Cabin typeOpen operator station
Engine
Engine modelJ.I. Case G-188D
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.1 L, 3,087 cm2, (188.4 cu·in)
Bore and stroke97.0 mm X 105.0 mm (3.82 in X 4.13 in)
Compression ratio17.5:1
Horsepower40.5 PS (29.8 kW; 40.0 HP) at 1,850 rpm
Torque173.6 N·m (17.7 kg·m, 127.9 ft·lb) at 1,350 rpm
StarterElectric
Coolant capacity:12.3 L (13 US. qt, 10.8 Imp. qt.)
Engine
Engine modelJ.I. Case G-148B
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.4 L, 2,425 cm2, (148.0 cu·in)
Bore and stroke86.0 mm X 105.0 mm (3.39 in X 4.13 in)
Horsepower42.6 PS (31.3 kW; 42 HP) at 1,850 rpm
Torque173.6 N·m (17.7 kg·m, 127.9 ft·lb) at 1,200 rpm
StarterElectric
Coolant capacity:11.4 L (12 US. qt, 10 Imp. qt.)
Transmission and chassis
ChassisCrawler
Steering type
BrakesContracting band
Transmission model
Transmission typeGear type with dry disc clutch
Gears3 forward and 1 reverse
Speed Forward: 7.2 kmh (4.5 mph) Reverse: 3.2 kmh (2 mph)
Tracks
Size14-inch tracks
PTO (Power take-off shaft)
Rear PTO type
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity34.1 L (9 US. gal, 7.5 Imp. gal.)
Pressure1500 psi (103.4 bar)
Pump flow15.0 gpm (56.8 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*