J.I. Case 580D

J.I. Case 580DThe J.I. Case 580D is a 2WD backhoe loader tractor manufactured by J.I. Case from 1980 to 1983. The J.I. Case 580D is equipped with a 3.4 L (207.0 cu·in) four-cylinder diesel engine and a sliding spur gear transmission with torque converter and power shuttle and 4 forward and 4 reverse gears.

The J.I. Case 580D backhoe-loader tractor used the J.I. Case G207D engine. It is a 3.4 L, 3,392 cm2, (207.0 cu·in) four-cylinder natural aspirated diesel engine with 102.0 mm (4.02 in) of the cylinder bore and 105.0 mm (4.13 in) of the piston stroke. The compression ratio rating is 17.0:1. This engine produced 60.8 PS (44.7 kW; 60.0 HP) at 2,100 rpm of output power.

The J.I. Case 580D is equipped with hydrostatic power steering, Cab and 83.3 liters (22 US gal.; 18.3 Imp. gal) fuel tank.

J.I. Case 580D Specifications

General Specifications
ModelJ.I. Case 580D
Length
Width
Height
Wheel base
Weight
Fuel tank capacity83.3 liters (22 US gal.; 18.3 Imp. gal)
Battery12V, CCA 625A, 42A
Cabin typeCab
Engine
Engine modelJ.I. Case G207D
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement3.4 L, 3,392 cm2, (207.0 cu·in)
Bore and stroke102.0 mm X 105.0 mm (4.02 in X 4.13 in)
Compression ratio17.0:1
Horsepower60.8 PS (44.7 kW; 60.0 HP) at 2,100 rpm
Torque217.0 N·m (22.1 kg·m, 159.9 ft·lb) at 1,400 rpm
StarterElectric
Oil capacity:6.6 L (7 US. qt, 5.8 Imp. qt.)
Coolant capacity:12.3 L (13 US. qt, 10.8 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD
Steering typeHydrostatic power
Brakes
Transmission model
Transmission typeSliding spur gear transmission with torque converter and power shuttle
Gears4 forward and 4 reverse
Speed Forward: 33.8 kmh (21 mph) Reverse: 30.4 kmh (18.9 mph)
Transmission oil capacity Transaxpe Oil capacity: 18.9 L (5 US. gal, 4.2 Imp. gal.)
Shuttle Oil capacity: 7.6 liters (2 US gal, 1.7 Imp. gal)
Tires
Front tires Industrial: 7.50×16
Rear tires Industrial: 14.9×24
Hydraulic system
Hydraulic type
Hydraulic capacity47.3 L (12.5 US. gal, 10.4 Imp. gal.)
Steering flow7.0 gpm (26.5 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*