The John Deere 2032R is a 4WD compact utility tractor from the 2R series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2013 to 2019. The John Deere 2032R is equipped with a 1.6 L (100.0 cu·in) three-cylinder diesel engine and a hydrostatic transmission with infinite forward and reverse gears.
The JD 2032R compact utility tractor used the Yanmar 3TNV88C-NJT engine. It is a 1.6 L, 1,638 cm2, (100.0 cu·in) three-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. The compression ratio rating is 19.1:1. This engine produced 31 PS (22.8 kW; 30.6 HP) at 2,500 rpm of gross output power.
The John Deere 2032R is equipped with power steering, wet disc brakes, Two-post foldable ROPS and 32.2 liters (8.5 US gal.; 7.1 Imp. gal) fuel tank.
Following attachments are available for the John Deere 2032R compact utility tractor:
- Mid-mount John Deere: 1,570 mm (62 in) mower deck
- Mid-mount John Deere: 1,820 mm (72 in) mower deck
- John Deere 220R loader
- John Deere 270B backhoe
John Deere 2032R Specifications
| General Specifications | |
| Model | John Deere 2032R |
| Length | – |
| Width | – |
| Height | – |
| Wheel base | 1,720 mm (67.7 in) |
| Weight (shipping) | 1,100 kg (2,425 lbs) |
| Fuel tank capacity | 32.2 liters (8.5 US gal.; 7.1 Imp. gal) |
| Battery | 12V, CCA 500A |
| Cabin type | Two-post foldable ROPS |
| Engine | |
| Engine model | Yanmar 3TNV88C-NJT |
| Engine type | Four-stroke, liquid-cooled, inline |
| Cylinders | 3 |
| Fuel type | Diesel |
| Displacement | 1.6 L, 1,638 cm2, (100.0 cu·in) |
| Bore and stroke | 88.0 mm X 90.0 mm (3.46 in X 3.54 in) |
| Compression ratio | 19.1:1 |
| Horsepower | 31 PS (22.8 kW; 30.6 HP) at 2,500 rpm |
| Starter | Electric |
| Oil capacity: | 4.5 L (4.8 US. qt, 4 Imp. qt.) |
| Transmission and chassis | |
| Chassis | 4×4 MFWD 4WD |
| Steering type | Power |
| Brakes | Wet disc |
| Final drive | Spur gear |
| Differential lock | Mechanical rear |
| Transmission model | – |
| Transmission type | Hydrostatic |
| Gears | Infinite forward and reverse |
| Tires | |
| Front tires | Ag: 7.00-12 Lawn/turf : 23×8.50-14 |
| Rear tires | Ag: 12.4-16 Lawn/turf : 14-17.5 |
| Three-Point Hitch | |
| Category | I |
| Control type | Position control |
| Lift capacity (at 610 mm/24 in) | 615 kg (1,355 lbs) |
| PTO (Power take-off shaft) | |
| Rear PTO type | Independent |
| Rear PTO speed | 540 rpm |
| Hydraulic system | |
| Hydraulic type | Open center |
| Pressure | 2500 psi (172.4 bar) |
| Valves | 0 to 3 |
| Pump flow | 5.3 gpm (20.1 lpm) |
| Steering flow | 4.0 gpm (15.1 lpm) |
| Total flow | 9.3 gpm (35.2 lpm) |
Be the first to comment