John Deere 3010

John Deere 3010The John Deere 3010 is a 2WD row-crop tractor from the New Generation series. This tractor was manufactured by John Deere in Waterloo, Iowa, USA from 1961 to 1963. The JD 3010 is equipped with one of three engines: a 3.3 L four-cylinder gasoline or LPG engine or a 4.2 L four-cylinder diesel engine and partially synchronized transmission with dry disc clutch and 8 forward and 3 reverse gears. This tractor was available on standard or row-crop version.

The JD 3010 is equipped with power steering, differential hydraulic wet disc brakes, open operator station, and 110.0 liters (29.0 US gal.; 24.2 Imp. gal) fuel tank for gasoline and diesel version or 94.6 liters (25.0 US gal, 20.8 Imp. gal) for LP-gas version. This tractor could be used with John Deere 48 loader.

The tractor could be equipped with the following engines:

  • John Deere gasoline engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) four-cylinder natural aspirated gasoline engine with 102.0 mm (4.02 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 7.5:1. This engine produced 56.4 PS (41.5 KW; 55.7 HP) of PTO output power.
  • John Deere LPG engine. It is a 3.3 L, 3,294 cm2, (201.0 cu·in) four-cylinder natural aspirated gasoline engine with 102.0 mm (4.02 in) of the cylinder bore and 102.0 mm (4.02 in) of the piston stroke. The compression ratio rating is 9.0:1. This LPG engine produced 56.2 PS (41.3 KW; 55.4 HP) of PTO output power.
  • John Deere diesel engine. It is a 4.2 L, 4,162 cm2, (254.0 cu·in) four-cylinder natural aspirated diesel engine. The cylinder bore is 105.0 mm (4.13 in) and the piston stroke is 121.0 mm (4.76 in) and the compression ratio rating is 16.4:1. This diesel engine produced 60.8 PS (44.7 KW; 59.9 HP) of PTO output power.

John Deere 3010 Specifications

General Specifications
ModelJohn Deere 3010
Length3,517 mm (138.5 in)
Width
Height
Wheel base2,280 mm (90.0 in)
Weight2,950 kg (6,503 lbs)
Fuel tank capacity Gas/diesel: 110.0 liters (29.0 US gal.; 24.2 Imp. gal)
LP-gas: 94.6 liters (25.0 US gal, 20.8 Imp. gal)
Battery12V, 75 Ah one for Gas/LP and two for Diesel
Cabin typeOpen operator station
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeGasoline
Displacement3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke102.0 mm X 102.0 mm (4.02 in X 4.02 in)
Compression ratio7.5:1
Horsepower56.4 PS (41.5 KW; 55.7 HP)
StarterElectric
Oil capacity7.6 liters (8.0 US.qts, 6.7 Imp. qts)
Coolant capacity:15.2 L (16.0 US. qt, 13.4 Imp. qt.)
Intake valve clearance0.38 mm (0.015 in)
Exhaust valve clearance0.70 mm (0.028 in)
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeLPG
Displacement3.3 L, 3,294 cm2, (201.0 cu·in)
Bore and stroke102.0 mm X 102.0 mm (4.02 in X 4.02 in)
Compression ratio9.0:1
Horsepower56.2 PS (41.3 KW; 55.4 HP)
StarterElectric
Oil capacity7.6 liters (8.0 US.qts, 6.7 Imp. qts)
Coolant capacity:15.2 L (16.0 US. qt, 13.4 Imp. qt.)
Intake valve clearance0.38 mm (0.015 in)
Exhaust valve clearance0.70 mm (0.028 in)
Engine
Engine modelJohn Deere
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement4.2 L, 4,162 cm2, (254.0 cu·in)
Bore and stroke105.0 mm X 121.0 mm (4.13 in X 4.76 in)
Compression ratio16.5:1
Horsepower60.8 PS (44.7 KW; 59.9 HP)
StarterElectric
Oil capacity7.6 liters (8.0 US.qts, 6.7 Imp. qts)
Coolant capacity:15.2 L (16.0 US. qt, 13.4 Imp. qt.)
Intake valve clearance0.46 mm (0.018 in)
Exhaust valve clearance0.46 mm (0.018 in)
Transmission and chassis
Chassis4×2 2WD
Steering typePower
BrakesDifferential hydraulic wet disc
Transmission modelJohn Deere Syncro-Range
Transmission typePartially synchronized with dry disc clutch
Gears8 forward and 3 reverse
Speed Forward: 23.3 kmh (14.5 mph) Reverse: 13.7 (8.5 mph)
Tires
Front tiresAg: 9.00-18, 6.00-14, 6.50-16, 7.50-16, 7.50-18
Rear tiresAg: 16.9-24, 13.6-28, 13.6-30, 18.4-30, 12.4-36, 13.9-36
Three-Point Hitch
CaterogyII
Control type
Lift capacity (at ends)
PTO (Power take-off shaft)
Rear PTO typeIndependent
Rear PTO spped540, 1,000 rpm
Hydraulic system
Hydraulic typeClosed center
Hydraulic capacity36.0 L (38.04 US. qt, 31.68 Imp. qt.)
Pressure2250 psi (155.1 bar)
Valves2
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

1 Comment

Leave a Reply

Your email address will not be published.


*