The John Deere 310 is a 2WD utility tractor manufactured by John Deere in Mannheim, Baden-Württemberg, Germany from 1966 to 1967. The John Deere 310 is equipped with a 2.5 L (152.0 cu·in) three-cylinder diesel engine and a transmission with 10 forward and 3 reverse gears.
The John Deere 310 utility tractor used the John Deere engine. It is a 2.5 L, 2,491 cm2, (152.0 cu·in) three-cylinder natural aspirated diesel engine with 98.0 mm (3.86 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. This engine produced 32.1 PS (23.6 kW; 31.6 HP) at 2,000 rpm of output power.
John Deere 310 Specifications
General Specifications | |
Model | John Deere 310 |
Length | – |
Width | – |
Height | – |
Wheel base | – |
Weight | 2,095 kg (4,619 lbs) |
Fuel tank capacity | – |
Battery | – |
Cabin type | Open operator station |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 3 |
Fuel type | Diesel |
Displacement | 2.5 L, 2,491 cm2, (152.0 cu·in) |
Bore and stroke | 98.0 mm X 110.0 mm (3.86 in X 4.33 in) |
Horsepower | 32.1 PS (23.6 kW; 31.6 HP) at 2,000 rpm |
Starter | Electric |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Manual |
Brakes | – |
Transmission model | – |
Transmission type | – |
Gears | 10 forward and 3 reverse |
Tires | |
Front tires | – |
Rear tires | – |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment