The John Deere 3330 is a 2WD utility tractor manufactured by John Deere in Rosario, Argentina from 1977 to 1980. The John Deere 3330 is equipped with a 3.9 L (239.2 cu·in) four-cylinder diesel engine and the Syncro-Range transmission with 8 forward and 2 reverse gears.
The John Deere 3330 utility tractor used the John Deere engine. It is a 3.9 L, 3,920 cm2, (239.2 cu·in) four-cylinder natural aspirated diesel engine with 107.0 mm (4.21 in) of the cylinder bore and 110.0 mm (4.33 in) of the piston stroke. The compression ratio rating is 16.7:1. This engine produced 79.7 PS (58.6 kW; 78.6 HP) at 2,500 rpm of output power.
The JD 3330 is equipped with power steering, hydraulic wet disc brakes, open operator station, and 145.0 liters (38.3 US gal.; 31.9 Imp. gal) fuel tank.
John Deere 3330 Specifications
General Specifications | |
Model | John Deere 3330 |
Length | 3,860 mm (152 in) |
Width | 2,280 mm (89.8 in) |
Height (exhaust) | 2,240 mm (88.2 in) |
Wheel base | 2,360 mm (92.9 in) |
Ground clearance | 670 mm (26.4 in) |
Weight (shiping) | 4,730 kg (10,428 lbs) |
Fuel tank capacity | 145.0 liters (38.3 US gal.; 31.9 Imp. gal) |
Battery | Two 6V, 140 Ah |
Cabin type | Open operator station |
Engine | |
Engine model | John Deere |
Engine type | Four-stroke, liquid-cooled, inline |
Cylinders | 4 |
Fuel type | Diesel |
Displacement | 3.9 L, 3,920 cm2, (239.2 cu·in) |
Bore and stroke | 107.0 mm X 110.0 mm (4.21 in X 4.33 in) |
Compression ratio | 16.7:1 |
Horsepower | 79.7 PS (58.6 kW; 78.6 HP) at 2,500 rpm |
Starter | Electric |
Oil capacity: | 7.0 L (7.4 US. qt, 6.2 Imp. qt.) |
Coolant capacity: | 12.0 L (12.7 US. qt, 10.6 Imp. qt.) |
Transmission and chassis | |
Chassis | 4×2 2WD |
Steering type | Power |
Brakes | Hydraulic wet disc |
Transmission model | Syncro-Range |
Transmission type | – |
Gears | 8 forward and 2 reverse |
Speed | Forward: 30.4 kmh (18.9 mph) Reverse: 10.6 (6.6 mph) |
Transmission oil capacity | 49.0 L (12.9 US. gal, 10.8 Imp. gal.) |
Tires | |
Front tires | Ag: 6.50×16, 7.50×16 |
Rear tires | Ag: 15.5×38, 18.4×34 |
Three-Point Hitch | |
Caterogy | II/I |
Control type | – |
Lift capacity (at ends) | – |
PTO (Power take-off shaft) | |
Rear PTO type | Independent with hydraulic clutch |
Rear PTO speed | 540 rpm |
Hydraulic system | |
Hydraulic type | Closed center |
We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.
Be the first to comment