John Deere 4005

John Deere 4005The John Deere 4005 is a 2WD or 4WD compact utility tractor from the 4000 series. This tractor was manufactured by John Deere in Augusta, Georgia, USA from 2008 to 2014. The John Deere 4005 is equipped with a 2.2 L four-cylinder diesel engine and partially synchronized transmission with 9 forward and 3 reverse gears.

The JD 4005 compact utility tractor used the Yanmar 4TNV88 engine. It is a 2.2 L, 2,189 cm2, (133.6 cu·in) four-cylinder natural aspirated diesel engine with 88.0 mm (3.46 in) of the cylinder bore and 90.0 mm (3.54 in) of the piston stroke. This engine produced 42.4 PS (31.2 kW; 41.8 HP) at 2,700 rpm of output power.

The John Deere 4005 is equipped with power steering, wet disc brakes, open operator station with two-post ROPS and 32.2 liters (8.5 US gal.; 7.1 Imp. gal) fuel tank. The JD 4005 could be equipped with the John Deere 300CX loader.

John Deere 4005 Specifications

General Specifications
ModelJohn Deere 4005
Length3,140 mm (123.6 in)
Width
Height2,150 mm (84.6 in)
Wheel base1,750 mm (68.9 in)
Weight2,375 kg (5,236 lbs)
Fuel tank capacity32.2 liters (8.5 US gal.; 7.1 Imp. gal)
Battery12V, CCA 770A
Cabin typeOpen operator station with two-post ROPS
Engine
Engine modelYanmar 4TNV88
Engine typeFour-stroke, liquid-cooled, inline
Cylinders4
Fuel typeDiesel
Displacement2.2 L, 2,189 cm2, (133.6 cu·in)
Bore and stroke88.0 mm X 90.0 mm (3.46 in X 3.54 in)
Compression ratio19.0:1
Horsepower42.4 PS (31.2 kW; 41.8 HP) at 2,700 rpm
StarterElectric
Oil capacity:5.3 L (5.6 US. qt, 4.7 Imp. qt.)
Coolant capacity:5.8 L (6.1 US. qt, 5.1 Imp. qt.)
Transmission and chassis
Chassis4×2 2WD or 4×4 MFWD 4WD
Steering typePower
BrakesWet disc
Transmission modelCollar Shift
Transmission typePartially synchronized
Gears9 forward and 3 reverse
Speed Forward: 19.0 kmh (11.8 mph) Reverse: 12.4 (7.7 mph)
Transmission oil capacity26.1 L (6.9 US. gal, 5.7 Imp. gal.)
Tires
Front tiresAg: 6.5-16 (2WD), 8-16 (4WD)
Rear tiresAg: 14.9-24
Three-Point Hitch
CaterogyI
Control type
Lift capacity (at ends)916 kg (2,020 lbs)
PTO (Power take-off shaft)
Rear PTO typeContinuous
Rear PTO speed540 rpm
Hydraulic system
Hydraulic typeOpen center
Hydraulic capacity26.1 L (27.58 US. qt, 22.96 Imp. qt.)
Pressure2262 psi (156 bar)
Valves2
Pump flow8.5 gpm (32.2 lpm)
Steering flow4.5 gpm (17 lpm)
Total flow13.0 gpm (49.2 lpm)
ATTENTION! Dear visitors, this site is not a trading platform, an official dealer or a spare parts supplier, so we do not have any price lists, spare parts catalogs, service or owner manuals. We are an information portal and provide the technical specifications.

We try to use verified sources and official documentation, however, differences between sources or errors in entering information may occur. In addition, the characteristics may vary depending on the modification and market. We do not provide advice on technical issues related to the any operation or repair. We do not recommend using provided information for repairing or spare parts ordering, use only official service manuals and spare-parts catalogs.

Be the first to comment

Leave a Reply

Your email address will not be published.


*